• Power over HDBaseT (PoH) supplies up to 100W of power down the twisted pair cable which can be utilized to power a remote TV or HDBaseT receiver...
• If an HDTV has a built-in tuner, DVD player, or other digital content source, the Audio Return Channel allows the TV to send audio data "upstream"...
• HDMI Ethernet Audio Control (HEAC) is a combined acronym for HEC and ARC.
• Video Graphics Array (VGA) refers specifically to the display hardware first introduced with the IBM PS/2 line of computers in 1987, but through...
• Serial Digital Interface (SDI) and High-Definition Serial Digital Interface (HD-SDI) are a family of video interfaces standardized by SMPTE (The...
• The Display Data Channel (DDC) is a communication channel between a source and display based on a special serial data bus called...
• Composite-Video, Component-Video (YPbPr), S-Video and VGA
• Sony/Philips Digital Interconnect Format (S/PDIF) is a type of digital audio interconnect cable used in consumer audio equipment to output audio...
• Digital Content Protection LLC (DCP) is an organization that licenses technologies for protecting premium commercial entertainment content....
• Before sending data, an HDCP transmitting device checks that the receiver is authorized to receive it. If so, the transmitter encrypts the data to...
• Audio Video Receivers are one of the many consumer electronics components typically found within a home theatre system. Their primary purpose is to...
• HDBaseT, supported by The HDBaseT Alliance, is a consumer electronic (CE) connectivity technology for long-distance transmission of...
• 3D compatible means that one or more of the 3D compliant formats are supported by the display or repeater device.
• Audio Return Channel - If an HDTV has a built-in tuner, DVD player, or other digital content source, the Audio Return Channel allows the TV to...
• In color reproduction, the gamut is a certain complete subset of colors. The most common usage refers to the subset of colors which can be accurately...
• Ethernet is a family of computer networking technologies for local area networks (LANs). The Ethernet standards comprise several wiring and signaling...
• Video Electronics Standards Association (VESA) is an international standards body for computer graphics. VESA's initial goal was to produce a...
• DisplayPort is a digital display interface developed by the Video Electronics Standards Association (VESA). The interface is primarily used to...
• The aspect ratio of an image describes the proportional relationship between its width and its height. It is commonly expressed as two numbers...
• Digital video is a type of digital recording system that works by using a digital rather than an analog video signal. Digital video comprises a...
• The Hot Plug Detect (HPD) channel senses plugging in or unplugging of an HDMI device, re-initializing the HDMI link if necessary.
• Transition-Minimized Differential Signaling is a technology for transmitting high-speed red, green, blue and timing digital serial data and is used...
• High-bandwidth Digital Content Protection (HDCP) is a form of digital copy protection developed by Intel Corporation to prevent copying of...
• Serial Digital Interface (SDI) and High-Definition Serial Digital Interface (HD-SDI) are a family of video interfaces standardized by SMPTE (The...
• The refresh rate (most commonly the "vertical refresh rate") is the number of times in a second that display hardware draws the data. This is...
• Wireless Home Digital Interface (WHDI) is a consumer electronic standard for a wireless HDTV connectivity throughout the home. WHDI enables delivery...
• Consumer Electronics Control (CEC) is an HDMI feature designed to allow the user to command and control up-to 15 CEC-enabled devices, that are...
• Frame rate is the frequency (rate) at which an imaging device produces unique consecutive images called frames. The term applies equally well to film...
• HDMI Ethernet Channel (HEC) provides a bidirectional Ethernet communication at 100 Mbit/s over an HDMI cable.
• Color depth is the number of bits used to indicate the color of a single pixel in a bitmapped image or video frame buffer. This concept is...
• Audio Video Receivers are one of the many consumer electronics components typically found within a home theatre system. Their primary purpose is to...
• A limited version of HDBaseT which supports high-definition video (HDMI), HD multi-channel audio, and RS232/IR control signals, via a...
• Extended display identification data (EDID) is a data structure provided by a digital display to describe its capabilities to a video source (e.g....
• Mandatory formats the display (sink) or repeater device must support to be HDMI 1.4a compliant are: For movie content – Frame Packing 1080p@...
• Digital Visual Interface (DVI) was developed to create an industry standard for the transfer of digital video content. The interface is designed to...
• Initially this referred to approximately 4,000 pixels of horizontal resolution for digital cinemas where 4K =4096 x 2160 or 8.8 megapixels. 4K...
• Digital Rights Management (DRM) technologies attempt to give control to the seller of digital content or devices after it has been given to a...
• A color model is an abstract mathematical model describing the way colors can be represented. Common color spaces based on the RGB model...
• From a high level, the AVI Infoframes flow from the source to the display every two video fields as a part of the video content in the TMDS lines....
• T568B defines the pin out, or order of connections, for wires in an RJ45 eight-pin modular connector plugs and sockets.
  

PanelCrafters' custom products are manufactured with the most advanced CAD/CAM technology available. Our drawings are developed and designed by skilled CAD operators to guarantee that your custom panels are executed with the utmost care and precision. We assure that dedication to quality is in every step of the process to deliver a perfect product to you, and we guarantee it. Our quality system has been certified to the ISO 9001 Standard since 2004.

We can work off your CAD drawings or we can design your plates and panels for you. Additionally, we can incorporate your logo or the logo of your customer for a unique and totally personalized product. Many of our Customers find that adding their logo to a rack panel, header panel or even on a wall plate provides a unique advertising opportunity that is both sophisticated and durable.

How to request a quote: Simply email your CAD drawings or general requirements to sales@panelcrafters.com. Be sure to include your contact information and Liberty dealer number to ensure prompt processing. We will respond with a detailed quote, lead-time and pdf proof for your panel layouts (Some complex projects or large bids are initially quoted without proofs - proofs for these items will be provided prior to production).
Need access to immediate pricing? Check out our FREE design tool options!

How to Order: When you're ready to order, please submit your purchase order and signed proofs to orders@libertycable.com or fax to 1-719-260-0075. Please note that orders received without signed proofs will be held until approval is received.

Our panels and plates are fully guaranteed to perform. We stand behind every product that we deliver. Our custom size plates and panels are manufactured from solid 1/8" 6061T6 aluminum. Computerized milling centers precisely manufacture your custom plates and panels.

Our plates and panels can be populated with both the most common and uncommon connectors. Many connectors are available in either solder back or pass through style and some offer solder-less field termination. Our connectors are the highest quality connectors available in the marketplace to ensure that your A/V signals are free of noise, distortion or degradation.

Of course you can order your plates and panels unpopulated if you wish to populate them yourself at a later time. Most of our customers find it to be both more cost effective for them, and a better use of their time, to have us deliver the finished product fully populated and ready to install.

Our plates and panels can also be delivered fully wired with any length and style of cable that is required for your project. Many Customers find our turnkey prewired options to be a convenient and effective solution.