7m (23ft) Generic Compatible 10G SFP+ Passive Direct Attach Copper Twinax Cable 24AWG
RF-SFP10GCU-07M
- Run Fiber Brand 10G Direct Attach Cable with SFP+ Connectors
Features:
7M Passive copper twinax cable
No power required
Pre-terminated SFP+ MSA connectors
Available in multiple lengths
Support for data rates up to 10.5Gbps
Compatible with network equipment & AV over IP equipment
Cisco standard firmware/compatibility
Applications:
Utilize the SFP+ ports on standard 10G network equipment
For In-Rack or other short connections
10GBASE-LR SFP+ 1310nm 10km DOM Transceiver - Single Mode Fiber
RF-SFP10GSM
- Run Fiber Brand 10G Singlemode SFP
Features:
Hot-pluggable SFP+ footprint
Supports 9.95 to 10.5Gb/s bit rates
Power dissipation < 1W
RoHS-6 compliant (lead-free)
Commercial temperature range 0 to 70C
Single 3.3V power supply
Maximum link length of 10km
Uncooled 1310nm DFB laser limiting electrical interface
Duplex LC connector
Built-in digital diagnostic functions
Applications:
For use in extenders and media converters
Fiber | Fiber Optic Tools
CLEANER 1-CLICK LC 1.25MM
RF-1.25CLP
- Run Fiber Brand Fiber Optic Pen Cleaner for LC Ferrules
Features:
Cleans male and female ends
>800 cleaning cycles
Manufactured with anti-static resin
Debris-free internal microfibers
Full sweep lens cleaning
Audible click during clean cycle
Simple push operation
Applications:
Cleaner for 1.25mm SC/ST/FC Ferrules
CLEANER 1-CLICK SC/ST 2.5MM
RF-2.50CLP
- Run Fiber Brand Fiber Optic Pen Cleaner SC/ST/FC Ferrules
Features:
Cleans male and female ends
>800 cleaning cycles
Manufactured with anti-static resin
Debris-free internal microfibers
Full sweep lens cleaning
Audible click during clean cycle
Simple push operation
Applications:
Cleaner for 2.5mm SC/ST/FC Ferrules
STRIP TOOL 3-HOLE FIBEROPTIC
RF-3HFS
- Run Fiber Brand Fiber Optic Jacket Stripper
Features:
Ideal for preparing fiber optic cabling for termination
For use with both multimode and single mode fiber
High-quality steel construction
Comfortable yellow plastic grips
Serrated blade
Safety lock
Spring design
Three-hole construction
Applications:
Preparing fiber optic cable for connector termination
SCISSORS FIBER KEVLAR YARN
RF-KSC
- Run Fiber Brand Fiber Optic Kevlar / Aramid Yarn Sheers
Features:
Ideal for preparing fiber optic cabling
For use with both multimode and single mode fiber
High-quality carbon steel construction
Stylish orange rubber grips
Designed for use with both right and left-handed users
Micro-serrated blade reduces slippage
Applications:
Preparing fiber optic cable for connector termination
VISUAL FAULT LOCATOR 2.5MM 1MW
RF-VFL
- Run Fiber Brand Fiber Optic Visual Fault Locator
Features:
1mW visible wave output
Up to 5km max signal transmission
Battery powered with 18 hour average battery life
Built-in dust cap
Metal construction
Continuous wave & pulsed wave modes of operation
650nm wavelength
Compatible with SC, ST & FC style connectors
Compatible with single mode & multimode fiber
Applications:
For locating out-of-spec bends & breaks in fiber
For verifying proper fiber optic connector termination
For toning & tracing fiber optic cable runs & strands
VISUAL FAULT 2.5-1.25 ADAPTER
RF-VFLADT
- Run Fiber Brand VFL Adapter for LC Connectors
Features:
Adapts a 2.5mm connection to a 1.25mm connection
Visual fault locators for us with LC style connectors
For use with all makes of 2.5mm visual fault locators
Compact size
Applications:
Secure Fiber Optic Network Patching and Routing
Military, Cable TV and Satellite TV, Fortune 500
LAN Networking
SSF PROFESSIONAL FIBER TRM KIT
SSF-FKIT03P
- Termination Tooling Kit for SC and LC Connectors
- Includes VFL Cleaver Scissors Stripper
- Ideally set up for SSF Fiber Termination
Applications:
DATA LOGGING FIBER TESTER KIT
SSF-TKITP-400
- Kit includes carrying case & strap
- Tests both multimode and single mode fibers
- Wavelengths of 850, 1300, 1310, and 1550nm
