Global Cache iTach WiFi IR Control Module WF2IR
  • Connects IR or sensor devices wirelessley to a network
  • Provide a new level of automation and control flexibility
  • 3 Independent selectable IR outputs or sensor inputs
Add to Cart

Global Cache iTach WiFi RS232 Control Module WF2SL
  • Connects serial / RS232 devices wirelessly to a Network
  • Send and receive serial signals from and to 3rd party devices
  • Natively controlled and managed by Arranger
Add to Cart

Control Systems and Accessories | Arranger Control | Touch Screens

MIMO 10" MYST ANDROID DISP MY-1090LBH
  • 1280x800 Resolution
  • Optically bonded, low glare capacitive touchscreen
  • 1000:1 contrast ratio, and 400-nit brightness (LCD panel)
Add to Cart

Mimo Adapt-IQV 10” Touchscreen Control Tablet MCT-10HPQ-POE
  • Comes with Mimo MLOCK pre-installed which allows you to “lock down” the touchscreen device to an Arranger UI URL by securely disabling physical buttons.
  • 10 point touch projected capacitive
  • PoE powered
  • Android 8.1
Add to Cart

Mimo Adapt-IQV 7" Touchscreen Control Tablet MCT-70HPQ-POE
  • Comes with Mimo MLOCK pre-installed which allows you to “lock down” the touchscreen device to an Arranger UI URL by securely disabling physical buttons.
  • 5 point touch projected capacitive
  • PoE powered
  • Android 8.1
Add to Cart

Table Stand 7/10.1" Tablets Mimo Tablet & Display Stand, Tilt Bracket, Black, for up to 10.1" screens MCT-DB01
  • For 75 x 75 VESA compatible screens like monitors, electronic picture frame, tablet, and more.
  • Bracket tilts 90-degrees.
  • Base has rubber padding to prevent damage to surfaces and 2 pre-drilled holes for permanent mounting.
Add to Cart

In-Wall Box 10.1" Tablet Black MWB-10-MCT
  • 10" Wall Box for Mimo Tablets
  • Installs between 16'' centers (not wall stud dependent)
  • Dimensions: 300mm (11.8) x 198Mmm (7.8") x 76.25mm (3")
Add to Cart

In-Wall Box 7" Tablet Black MWB-7-MCT
  • 7" Wall Box for Mimo Tablets
  • Installs between 16'' centers (not wall stud dependent)
  • Dimensions: 228mm (8.98) X 160.2mm (6.3") X 76.2mm (3")
Add to Cart

Control Systems and Accessories | DigitaLinx Standalone Solutions

DigitaLinx HDMI2.0 Auto Sensing Room Controller 4K60 4:4:4 18G HDMI Auto Sensing room controller with RS232, Relay, and CEC control w/ analog and digital audio de-embed DL-UHDILC
  • Stand alone signal sensing controller powers on/off display when signal is presented/removed
  • Automates room peripherals when video signal is introduced to system via RS232 or CEC and Contact closures
  • Passes HDMI & HDMI 2.0 signals up to 18G 4K60 4:4:4
Add to Cart

TeamUp+ Series 4K60 Web-Conferencing Switcher/Hub   4K60 18G 3 Input & 3 Output Web-Conferencing Switcher/Hub with HDMI, USB-C, USB3.0-B, & USB3.0-A ports for creating BYOM connectivity in a dedicated Zoom/Teams Room DL-SCU33-SW
  • Overview: Enables multi-format switching between BYOM (bring your own meeting) devices such as laptops and dedicated room systems such as Zoom, Teams, etc. Providing AV switching and USB routing for BYOM and cloud-based conferencing applications. Allowing  USB peripherals to switch between dedicated room systems & BYOM devices. Auto switching is triggered via USB connectivity from the Laptop
  • Unique Feature Set: Allow for Single and Dual Screen Capability  even in BYOM mode providing a seamless experience for the user by mirroring content onto the second display. The "Share" HDMI output allows for the existing HDMI presentation cable to be used in dedicated room system mode or BYOM mode. The HDMI Share output will follow the LAPTOP input and will not route to the display output unless the BYOM has been triggered via USB or *Other
  • HDMI and USB-C Video Resolutions: Supports a full range of resolutions up to 4K60 4:4:4

DigitaLinx "ARK" Series Three Piece HDMI, VGA, & USB Room Kit ALL IN ONE AV Extension and Control, features 3 HDMI / 1 VGA input, USB 2.0 Transfer, Built-in Audio Amplifier, Display control, and Monitoring Software DL-ARK-3H1VC
  • System Includes input plate, system control plate, receiver/processor, power supply, mounting tabs for RX, white and black cover & face plates, button lables
  • Input plate offers 2 HDMI, VGA w/audio, USB-B, and separate pass-through audio. (Input 4 is on RX) HDBaseT output up to 70m to receive unit. HDCP2.2 compliant
  • Receiver offers HDMI input for local devices, HDBT in, HDMI output with 4K scaling, 70v / 8ohm amp, line / mic in w/ selectable phantom power, audio out, USB2.0 high speed 3 port hub, HDMI out, 2 LAN ports, mute relay, RS232 port, IR port

DigitaLinx "ARK" Series Three Piece HDMI & USB Room Kit ALL IN ONE AV Extension and Control, features 4 HDMI inputs, USB 2.0 Transfer, Built-in Audio Amplifier, Display control, and Monitoring Software DL-ARK-4HC
  • System Includes input plate, system control plate, receiver/processor, power supply, mounting tabs for RX, white and black cover & face plates, button lables
  • Input plate offers 3 HDMI, USB-B, and separate pass-through audio. (Input 4 is on RX) HDBaseT output up to 70m to receive unit. HDCP2.2 compliant
  • Receiver offers HDMI input for local devices, HDBT in, HDMI output with 4K scaling, 70v / 8ohm amp, line / mic in w/ selectable phantom power, audio out, USB2.0 high speed 3 port hub, HDMI out, 2 LAN ports, mute relay, RS232 port, IR port

Digitalinx Series EDID & HDCP Manager 18G 4K60 HDMI EDID & HDCP Manager with BUS or External power options DL-EDHDMGR
  • In-Line EDID Management
  • In-Line HDCP Management
  • CEC Blocking option
Add to Cart

more...