DL-1H1A1U-WPKT-W - Digitalinx HDMI HDBaseT Wall Plate Extension Set with USB

Digitalinx HDMI HDBaseT Wall Plate Extension Set with USB DL-1H1A1U-WPKT-W

HDMI 1.4b, HDCP 2.2 and HDCP 1.4 compliant
Video up to 4K2K@30Hz (4:4:4) and 4K2K@60Hz (4:2:0) 10.2G
Supports all HDMI audio formats
Single Cat6/6a cable up to 40 meters for 4K and 70 meters
for 1080P
HDR, CEC pass-through
Dedicated 3.5mm analog audio transmission channel,
independent with HDMI signal
24V POC, Power Supply for RX only
TX is standard US 1-Gang size
Supports USB 2.0 transmission

DL-2H1V1U-WP-W - Digitalinx HDMI, VGA, and USB 2.0 Extender with Display Control

Digitalinx HDMI, VGA, and USB 2.0 Extender with Display Control DL-2H1V1U-WP-W

Digitalinx HDMI, VGA, and USB 2.0 Extender with Display
Control
Features:
Auto Switches & Extends HDMI, Analog Audio, and USB 2.0 up
to 100m / 330’
Integrated RS232 controller can automatically or manually
power on/off display
Supports resolutions up to 4K@60Hz 4:2:0 / 8 bit deep color
Supports HDCP 2.2
Pass-Through Analog audio port passes audio direct to audio
output of receiver independent and regardless of video
source
Auto Switching and Front Panel Input and Display on/off
Selection
Supports remote PoE power from receiver
NOTE: Requires the use of the DL-HD2A-RX receiver
Compatibility note ** Now Supporting "New" ActivPanel
displays from Promethean!! Please contact Liberty support
for more information!
Applications:
Education, Classroom, training room, corporate, conference
room
Anywhere HDMI switching/extension and USB extension is
required including interactive display control extension,
collaboration cameras, and mics

DL-3H1U-WP-W - DigitaLinx Three HDMI HDBaseT Wall Plate w/ USB

DigitaLinx Three HDMI HDBaseT Wall Plate w/ USB DL-3H1U-WP-W

DigitaLinx Autoswitching Wallplate with 3 HDMI inputs
Features:
3 HDMI inputs with analog audio input
Auto switching with video detection technology;
One analog audio passthrough to receiver
4Kx2K@60Hz 4:2:0 Chroma subsampling) output up to 100m
HDMI 2.0 and HDCP 2.2 compliance.
USB 2.0 up to 480Mbps over HDBaseT 100m
2Gang US Decora wallplate
Ethernet and IR passthrough over HDBaseT
With POE support to be powered by any HDBaseT device with
PSE
Applications:

DL-USB2-C - USB 2.0 Hi-Speed Twisted Pair Extender Client

USB 2.0 Hi-Speed Twisted Pair Extender Client DL-USB2-C

Extends USB High-Speed (480 Mbps) up to 100m (330ft)
Supplies power to the host side
Uses any Cat5e/6/6A twisted pair cabling

DL-USB2-WP-C - USB 2.0 Hi-Speed Twisted Pair Extender WP Client

USB 2.0 Hi-Speed Twisted Pair Extender WP Client DL-USB2-WP-C

Extends USB Hi-Speed (480 Mbps) up to 100 m (330 ft)
Supplies power to the host side
Uses any Cat5e/6/6A twisted pair cabling

DL-USB2-WP-H - USB 2.0 Hi-Speed Twisted Pair Extender WP Host

USB 2.0 Hi-Speed Twisted Pair Extender WP Host DL-USB2-WP-H

Extends USB High-Speed (480 Mbps) up to 100m (330ft)
Must be powered by client side
Uses any Cat5e/6/6A twisted pair cabling

Intelix Series USB 2.0 High Speed Client / Remote Side Extender USB2.0 High Speed extension with Isochronous data support up to 50m client side with 2 port USB-A hub INT-USB2-50C

Expansion: Extend up to two USB 2.0 peripherals 50 meters, way beyond the typical 5-meter limitation by only using one CAT6 cable. Connect various USB peripherals to your laptop or personal computer such as web cameras, microphones, cable cards and disk drives.
Compliance: Gen USB 2.0 while being fully backways compatible with USB 1.1
Data Transfer Rate: Up to 480 Mbps shared between all ports

Intelix Series USB 2.0 High Speed Client / Remote Side Extender Wall Plate USB2.0 High Speed extension with Isochronous data support up to 50m client side with 2 port USB-A hub wall plate style INT-USB2-50CWP

Expansion: Extend up to two USB 2.0 peripherals 50 meters, way beyond the typical 5-meter limitation by only using one CAT6 cable. Connect various USB peripherals to your laptop or personal computer such as web cameras, microphones, cable cards and disk drives.
Compliance: Gen USB 2.0 while being fully backways compatible with USB 1.1
Data Transfer Rate: Up to 480 Mbps shared between all ports

Intelix Series USB 2.0 High Speed Host / Local Side Extender USB 2.0 High Speed extension with Isochronous data support up to 50m - Local only INT-USB2-50H

Required Remote Device: wall plate or a standard device
Expansion: Extend up to two USB 2.0 peripherals 50 meters, way beyond the typical 5-meter limitation by only using one CAT6 cable. Connect various USB peripherals to your laptop or personal computer such as web cameras, microphones, cable cards and disk drives.
Compliance: Gen USB 2.0 while being fully backways compatible with USB 1.1

Intelix Series USB 2.0 High Speed Host / Local Side Wall Plate Extender USB2.0 High Speed extension with Isochronous data support up to 50m host side wall plate style INT-USB2-50HWP

Expansion: Extend up to two USB 2.0 peripherals 50 meters, way beyond the typical 5-meter limitation by only using one CAT6 cable. Connect various USB peripherals to your laptop or personal computer such as web cameras, microphones, cable cards and disk drives.
Compliance: Gen USB 2.0 while being fully backways compatible with USB 1.1
Data Transfer Rate: Up to 480 Mbps shared between all ports

Intelix USB 3.1 High Performance / Backward Compatible Extender Set USB 3.2 Gen 1 100m extender set over Cat6A / 7 backward compatible to 3.2 Gen 1, 2.0, 1.1 w/ 4 port hub on client side for multiple connected peripherals INT-USB3.1CX

Backward compatible with previous USB versions. Multiple version can be running simultaneously
USB 3.2 Gen 1 extension up to 100m over Cat6A /7
Supports Isochronous data extension through 2.0 High Speed. Use INT-USB3.1CX-PLUS if full 3.2 Gen 1 Isochronous is required

Intelix Series USB 3.1 "Plus" High Performance / Backward Compatible Extender Set USB 3.2 Gen 1 100m extender set over Cat6A / 7 backward compatible to 3.0, 2.0, 1.1 w/ 4 port hub on client side with enhanced USB3 ISO Support INT-USB3.1CX-PLUS

USB3.2 Gen 1 Extender set backward compatible and simultaneous extension of 2.0 & 1.1 devices
The 3.1CX "PLUS" is specifically designed with enhanced hardware for video applications requiring perfect isochronus (ISO) data transactions up to 3.2 Gen 1 (5Gbps) including cameras up to 4K
Extend USB signals up to 5Gbps up to 100 meters over Cat6A or Cat7

PMI-A9A - Full-Speed USB Extender - Client Side

Full-Speed USB Extender - Client Side Plate Mountable USB extender can be added to any Panel Crafters Plate PMI-A9A

USB 2.0 full speed 12Mbps, USB 1.1 legacy support
Up to 330 feet cable lengths on U/UTP category 5/5e/6
Not for USB 2.0 high speed

PMI-A9B - Full-Speed USB Extender - Host Side

Full-Speed USB Extender - Host Side Plate Mountable USB extender can be added to any Panel Crafters Plate PMI-A9B

USB 2.0 full speed 12Mbps, USB 1.1 legacy support
Up to 330 feet cable lengths on U/UTP category 5/5e/6
Not for USB 2.0 high speed

more...