150m HDBaseT HDMI, Ethernet, RS232 & Bi-Directional IR - Receiver

150m HDBaseT HDMI, Ethernet, RS232 & Bi-Directional IR - Receiver

Ordering Options

Pricing

Login for Your Price

Availability

Login for Availability

Product Options

Units:
You might also consider
this alternate:
Add to Cart

At a glance

Core Brand

DIGI-HDXL-R - 150m HDBaseT HDMI, Ethernet, RS232 & Bi-Directional IR - Receiver

Documents

Spec Sheet
Installation Guide

Product Overview

Features and Benefits

  • HDMI transmission up to 150m (492 ft)
  • Two-port Ethernet switch; locking power connector
  • Supports 1080p/24bit and audio formats up to 7.1 audio
  • Supports HDBaseT, CEC specifications; HDMI/HDCP compliant
  • Built-in surge protection, diagnostic LEDs
  • Bidirectional Wideband IR, RS232 and 100BaseT Ethernet pass-through
  • PoE (Power over Ethernet) - power from TX (PS not included) when used with DIGI-HDXL-S

Applications

  • Extension of HDMI and control signals up to 150 meters
  • Limited access to power for extenders on both ends
  • Ideal for digital signage, home theater, commercial video systems

DIGI-HDXL-R Summary

The Intelix DIGI-HDXL-R extends HDMI over a single cable by incorporating HDBaseT technology. The DIGI-HDXL-R supports 1080p video signals up to 150 meters (492 feet) including multichannel audio. Built-in surge protection and diagnostic LEDs ensure hassle-free and robust installations. Key features of the new extender series include local HDMI output on the transmitter, power over Ethernet (PoE), bidirectional IR, bidirectional RS232, and Ethernet pass-through with a 2-port network switch on the receiver.

Flexible power design allows the DIGI-HDXL series extenders to be powered at either the TX or RX end, and only one power supply is required. The power supply (PS-24D-25) is sold separately. The bidirectional wideband IR, bidirectional RS232, and Ethernet pass-through capabilities make the DIGI-HDXL compatible with most control systems. The IR emitter (DIGIB-EMT) and IR receiver (DIGIB-EYE) are sold separately. The two-port network switch on the DIGI-HDXL-R allows a second device to share the 100BaseT Ethernet pass-through connection without adding additional hardware to the installation.

The DIGI-HDXL series extenders are only compatible with Intelix XL-series HDBaseT product offerings. An HDBaseT link will not be established with other HDBaseT products.

No available cross references for DIGI-HDXL-R

Alternates that meet or exceed DIGI-HDXL-R specifications

Part Number Description
INT-HDXL100-RX150M Slim HDMI, IR, RS232 and Ethernet HDBaseT Extender - Receiver
150m HDBaseT HDMI, Ethernet, RS232 & Bi-Directional IR - Receiver150m HDBaseT HDMI, Ethernet, RS232 & Bi-Directional IR - Receiver150m HDBaseT HDMI, Ethernet, RS232 & Bi-Directional IR - Receiver150m HDBaseT HDMI, Ethernet, RS232 & Bi-Directional IR - Receiver150m HDBaseT HDMI, Ethernet, RS232 & Bi-Directional IR - Receiver

Specifications

Download PDF Spec Sheet
Product Line:   DIGI-HDXL-R
Input/Output Connections
HDMI OutputOne (1) HDMI Type A Receptacle Connector
Twisted Pair (HDBaseT)One (1) Shielded RJ45 Female
RS232One (1) 3-Pole Euroblock connector
EthernetTwo (2) Shielded RJ45 Female
IR InputOne (1) 3.5mm TRS
IR OutputOne (1) 3.5mm TS
24V DC PowerOne (1) 5.5 mm Outside Diameter, 2.1 mm Inside Diameter Barrel
Supported Audio, Video, and Control
Maximum Video CompatibilityDeep Color 24 Bit at 1080p
Video ComplianceHDMI, HDCP, and CEC (Consumer Electronics Control)
Embedded AudioUp to PCM 8 channel, Dolby Digital TrueHD, and DTS-HD Master Audio
Input DDC Signal5.0 volts p-p (TTL)
Input Video Signal0.5 to 1.0 volts p-p
IR Carrier Frequency Range33-55kHz at 5 volts
Ethernet100BaseT
RS232 Baud RateUp to 115200 baud
HDBaseT Signal Characteristics
Maximum Distance150 m (492 ft)
Cable RequirementsSolid core shielded Category 5e, Category 6 or greater with TIA/EIA-568B crimp pattern
Gain0 dB – 10 dB at 100 MHz
Signal to Noise Ratio (SNR)> 70 dB at 100 MHz over 100 m
Return Loss< -30 dB at 5 KHz
Total Harmonic Distortion (THD)< 0.005% at 1 KHz
Min-Max Signal Level< 0.3 V – 1.45 Vp-p
Differential Phase Error±10° at 135 MHz over 100 m
Chassis and Environmental
EnclosurePainted steel
Dimensions85 mm x 151 mm x 24 mm (3.35 in. x 5.94 in x 0.95 in)
Shipping Weight0.5 kg (1.1 lbs.)
Operating Temperature (Environment)0° to +40° C (+32° to +104° F)
Operating Temperature (Chassis)31° C (88° F) (S); 38° C (100° F) (R)
Operating Humidity (Environment)20% to 90%, Non-condensing
Storage Temperature (Environment)-10° to +60° C (+14° to +140° F)
Storage Humidity (Environment)20% to 90%, Non-condensing
Power, ESD, and Regulatory
PoE Standard (Twisted Pair [HDBaseT] port) to extender802.3af
Maximum Power Consumption22 watts
Power Supply (Not Included)24vDC / 1.5 Amp
ESD Protection15kV
RegulatoryCE, RoHS
Other
Standard Warranty2 years
Diagnostic IndicatorsHeartbeat, Link, HDMI, and power LEDs
Included AccessoriesInstallation Guide
Compatible Transmitters (AV and Control)FLX-BO4A-XL
Compatible Transmitters (AV, PoE and Control)DIGI-HDXL-S
Accessories
Power SupplyPS-24D-25
IR EmitterDIGIB-EMT
IR ReceiverDIGIB-EYE
Distances and picture quality may be affected by cable grade, cable quality, source and destination equipment, RF and electrical interference, and cable patches.

Other Essential Products