150m HDBaseT HDMI, Ethernet, RS232 & Bi-Directional IR - Transmitter

Ordering Options

Pricing (USD)

Your Price: USD $341.19
Bargain: USD $48.67 Each
Please note: Bargain Prices are good for online orders only and limited to stock on hand. When they're gone, so is the bargain price...


148 EA in Colorado

Product Options


Want to save some money?

We've got an "open-box" alternative for DIGI-HDXL-S (while supplies last) Click below to learn more.

You might also consider this alternate:

Add to Cart
DIGI-HDXL-S - 150m HDBaseT HDMI, Ethernet, RS232 & Bi-Directional IR - Transmitter

Product Overview

Features and Benefits

  • HDMI transmission up to 150m (492 ft)
  • HDMI loop out; locking power connector
  • Supports 1080P/24bit and audio formats up to 7.1 audio
  • Supports HDBaseT, CEC specifications; HDMI/HDCP compliant
  • Built-in surge protection, diagnostic LEDs
  • Bidirectional Wideband IR, RS232 and 100BaseT Ethernet pass-through
  • PoE (Power over Ethernet) - power from RX (PS not included) when used with DIGI-HDXL-R


  • Works with Scientific Atlantic or Cisco cable boxes
  • Extension of HDMI and control signals up to 150 meters
  • Limited access to power for extenders on both ends
  • Ideal for digital signage, home theater, commercial video systems


The Intelix DIGI-HDXL-S extends HDMI over a single cable by incorporating HDBaseT technology. The DIGI-HDXL-S supports 1080p video signals up to 150 meters (492 feet) including multichannel audio. Built-in surge protection and diagnostic LEDs ensure hassle-free and robust installations. Key features of the new extender series include local HDMI output on the transmitter, power over Ethernet (PoE), bidirectional IR, bidirectional RS232, and Ethernet pass-through with a 2-port network switch on the receiver.

The HDMI distribution chip in the DIGI-HDXL-S sends one signal to the HDBaseT output and the other signal to the local HDMI output for a local display. This new feature also allows HDMI source devices that do not support DDC clock stretching (HDMI 1.2 and below) to be extended over the HDBaseT link without issues. Flexible power design allows the DIGI-HDXL series extenders to be powered at either the TX or RX end, and only one power supply is required. The power supply (PS-24D-25) is sold separately. The bidirectional wideband IR, bidirectional RS232, and Ethernet pass-through capabilities make the DIGI-HDXL compatible with most control systems.

The DIGI-HDXL series extenders are only compatible with Intelix XL-series HDBaseT product offerings. An HDBaseT link will not be established with other HDBaseT products.

DIGI-HDXL-S Diagrams

No available cross references for DIGI-HDXL-S

Alternates that meet or exceed DIGI-HDXL-S specifications

Part Number Description
INT-HDXL100-TX150M Slim HDMI, IR, RS232 and Ethernet HDBaseT Extender - Transmitter
150m HDBaseT HDMI, Ethernet, RS232 & Bi-Directional IR - Transmitter150m HDBaseT HDMI, Ethernet, RS232 & Bi-Directional IR - Transmitter150m HDBaseT HDMI, Ethernet, RS232 & Bi-Directional IR - Transmitter150m HDBaseT HDMI, Ethernet, RS232 & Bi-Directional IR - Transmitter

Supporting Documents

Installation Guide


PDF Spec Sheet

Product Line:   DIGI-HDXL-S
Input/Output Connections
HDMI InputOne (1) HDMI Type A Receptacle Connector
HDMI OutputOne (1) HDMI Type A Receptacle Connector
Twisted Pair (HDBaseT)One (1) Shielded RJ45 Female
RS232One (1) 3-Pole Euroblock connector
EthernetOne (1) Shielded RJ45 Female
IR InputOne (1) 3.5mm TRS
IR OutputOne (1) 3.5mm TS
24V DC PowerOne (1) 5.5 mm Outside Diameter, 2.1 mm Inside Diameter Barrel
Supported Audio, Video, and Control
Maximum Video CompatibilityDeep Color 24 Bit at 1080p
Video ComplianceHDMI, HDCP, and CEC (Consumer Electronics Control)
Embedded AudioUp to PCM 8 channel, Dolby Digital TrueHD, and DTS-HD Master Audio
Input DDC Signal5.0 volts p-p (TTL)
Input Video Signal0.5 to 1.0 volts p-p
IR Carrier Frequency Range33-55kHz at 5 volts
RS232 Baud RateUp to 115200 baud
HDBaseT Signal Characteristics
Maximum Distance150 m (492 ft)
Cable RequirementsSolid core shielded Category 5e, Category 6 or greater with TIA/EIA-568B crimp pattern
Gain0 dB – 10 dB at 100 MHz
Signal to Noise Ratio (SNR)> 70 dB at 100 MHz over 100 m
Return Loss< -30 dB at 5 KHz
Total Harmonic Distortion (THD)< 0.005% at 1 KHz
Min-Max Signal Level< 0.3 V – 1.45 Vp-p
Differential Phase Error±10° at 135 MHz over 100 m
Chassis and Environmental
EnclosurePainted steel
Dimensions85 mm x 151 mm x 24 mm (3.35 in. x 5.94 in x 0.95 in)
Shipping Weight0.5 kg (1.1 lbs.)
Operating Temperature (Environment)0° to +40° C (+32° to +104° F)
Operating Temperature (Chassis)31° C (88° F) (S); 38° C (100° F) (R)
Operating Humidity (Environment)20% to 90%, Non-condensing
Storage Temperature (Environment)-10° to +60° C (+14° to +140° F)
Storage Humidity (Environment)20% to 90%, Non-condensing
Power, ESD, and Regulatory
PoE Standard (Twisted Pair [HDBaseT] port) to extender802.3af
Maximum Power Consumption22 watts
Power Supply (Not Included)24vDC / 1.5 Amp
ESD Protection15kV
RegulatoryCE, RoHS
Standard Warranty2 years
Diagnostic IndicatorsHeartbeat, Link, HDMI, and power LEDs
Included AccessoriesInstallation Guide
Compatible Receivers (AV, PoE and Control)DIGI-HDXL-R
Power SupplyPS-24D-25
Distances and picture quality may be affected by cable grade, cable quality, source and destination equipment, RF and electrical interference, and cable patches.

DIGI-HDXL-S Firmware

DIGI-HDXL-S Software

DIGI-HDXL-S Pre-made Drivers

Other Essential Products