USB 2.0 Hi-Speed Twisted Pair Extender Host

Ordering Options


Login for Your Price


Login for Availability

Product Options

Add to Cart
DL-USB2-H - USB 2.0 Hi-Speed Twisted Pair Extender Host

Product Overview

Features and Benefits

  • Extends USB Hi-Speed (480 Mbps) up to 100 m (330 ft)
  • Powered from client side extender
  • Uses any Cat5e/6/6A twisted pair cabling
  • Supplies 500mA to USB devices
  • Can also be used to extend USB 1.1 signals


  • Extending high-bandwidth USB devices
  • Plenum routing of USB signals
  • Does not support Webcams needing Isochronous data mode. Use DIGI-USB2 for these applications

DL-USB2-H Summary

The Digitalinx DL-USB2 products will extend a Hi-Speed USB 2.0 signal (480 Mbps) up to 100 meters (328 feet). The modular extenders may be powered on either end for low power devices such as keyboards or mice. For remote devices which require more power, the client side extender will require to be powered.

Initial offerings in the product line include a modular USB host transmitter (DL-USB2-H), a modular USB client receiver (DL-USB2-C), a wall plate USB host transmitter (DL-USB2-WP-H), and a wall plate USB receiver (DL-USB2-WP-C). All combinations of host and client are compatible with each other.

DL-USB2-H Diagrams

No available cross references for DL-USB2-H

Alternates that meet or exceed DL-USB2-H specifications

No equivalent alternates available for DL-USB2-H

USB 2.0 Hi-Speed Twisted Pair Extender HostUSB 2.0 Hi-Speed Twisted Pair Extender HostUSB 2.0 Hi-Speed Twisted Pair Extender HostUSB 2.0 Hi-Speed Twisted Pair Extender HostUSB 2.0 Hi-Speed Twisted Pair Extender HostUSB 2.0 Hi-Speed Twisted Pair Extender Host

Supporting Documents

DL-USB2 Quick Start Guide


PDF Spec Sheet

Product Line:   DL-USB2-H
I/O Connections
USBOne (1) USB Type B
Twisted PairOne (1) 8P8C port (Shielded RJ45)
5V DC PowerOne (1) Barrel (5.5 mm OD; 2.1 mm ID)
Supported Signals
USB 2.0Low Speed (1.5 Mbps), Full Speed (12 Mbps), and Hi-Speed (480 Mbps)
USB 1.1Low Speed (1.5 Mbps) and Full Speed (12 Mbps)
Extender Characteristics
Maximum Distance100 m (328 ft)
Cable RequirementsCategory 5e, 6, or 6A with TIA/EIA-568B crimp pattern
Chassis and Environmental
EnclosurePainted Aluminum
Dimensions52 mm x 64 mm x 24 mm (2.05 in x 2.52 in x 0.94 in)
Shipping Weight0.3 kg (0.66 lbs)
Operating Temperature0° to +40° C (+32° to +104° F)
Operating Humidity20% to 90%, Non-condensing
Storage Temperature-10° to +60° C (+14° to +140° F)
Storage Humidity20% to 90%, Non-condensing
Power, ESD, and Regulatory
Power to USB Devices500mA
Maximum Power Consumption4.3 watts
Power Supply Input100V-240VAC / 50-60 Hz
Power Supply Output5VDC / 2A
ESD Protection±8kV (air-gap discharge), ±4KV (contact discharge)
Extender RegulatoryFCC, CE, RoHS
Power Supply RegulatoryUL, CUL, CE, PSE, GS, RoHS
Warranty2 years
Diagnostic IndicatorsPower and Link LEDs
Included AccessoriesInstallation Guide, Power Supply with US plug, USB A to USB B cable
Compatible Client ExtendersDL-USB2-C, DL-USB2-WP-C
Distances and picture quality may be affected by cable grade, cable quality, source and destination equipment, RF and electrical interference, and cable patches. Intelix specifications are based on straight-through cabling with standard-grade Cat 5e unless noted otherwise.

DL-USB2-H Firmware

DL-USB2-H Software

DL-USB2-H Pre-made Drivers

Disclaimer: Liberty AV assumes no responsibility or liability for pre-built control system drivers. The driver may or may not work for all projects, in situations where the driver is not suitable for the switching architecture, the driver cannot be adjusted for customized usage by Liberty. If you would like to contract services for customized control for a project please contact your sales representative.

Other Essential Products