7m (23ft) Generic Compatible 10G SFP+ Passive Direct Attach Copper Twinax Cable 24AWG
RF-SFP10GCU-07M
  • Run Fiber Brand 10G Direct Attach Cable with SFP+ Connectors
    Features:
    7M Passive copper twinax cable
    No power required
    Pre-terminated SFP+ MSA connectors
    Available in multiple lengths
    Support for data rates up to 10.5Gbps
    Compatible with network equipment & AV over IP equipment
    Cisco standard firmware/compatibility
    Applications:
    Utilize the SFP+ ports on standard 10G network equipment
    For In-Rack or other short connections
show options
1.64ft (.5M)
|
3.28ft (1M)
|
9.84ft (3M)
|
22.96ft (7M)
10GBASE-SR SFP+ 850nm 300m DOM Transceiver - Multimode Fiber
show options
10GBASE-LR SFP+ 1310nm 10km DOM Transceiver - Single Mode Fiber
  • Run Fiber Brand 10G Singlemode SFP
    Features:
    Hot-pluggable SFP+ footprint
    Supports 9.95 to 10.5Gb/s bit rates
    Power dissipation < 1W
    RoHS-6 compliant (lead-free)
    Commercial temperature range 0 to 70C
    Single 3.3V power supply
    Maximum link length of 10km
    Uncooled 1310nm DFB laser limiting electrical interface
    Duplex LC connector
    Built-in digital diagnostic functions
    Applications:
    For use in extenders and media converters
show options
Fiber | Fiber Optic Tools
Corning Fiber Optic UNICAM Termination System Fiber Cleaning Fluid
  • Single Dispensing bottle of Fiber Cleaning Fluid
  • Replenishment for the TKT-UNICAM-PFC tool kit
  • Can be used with any fiber or fiber tool kit
show options
Corning Fiber Optic UNICAM Termination System Fiber Cleaning cloths
  • Single Dispensing bottle of Fiber Cleaning cloths
  • Replenishment for the TKT-UNICAM-PFC tool kit
  • Can be used with any fiber or fiber tool kit
show options
CLEANER 1-CLICK LC 1.25MM
  • Run Fiber Brand Fiber Optic Pen Cleaner for LC Ferrules
    Features:
    Cleans male and female ends
    >800 cleaning cycles
    Manufactured with anti-static resin
    Debris-free internal microfibers
    Full sweep lens cleaning
    Audible click during clean cycle
    Simple push operation
    Applications:
    Cleaner for 1.25mm SC/ST/FC Ferrules
show options
CLEANER 1-CLICK SC/ST 2.5MM
  • Run Fiber Brand Fiber Optic Pen Cleaner SC/ST/FC Ferrules
    Features:
    Cleans male and female ends
    >800 cleaning cycles
    Manufactured with anti-static resin
    Debris-free internal microfibers
    Full sweep lens cleaning
    Audible click during clean cycle
    Simple push operation
    Applications:
    Cleaner for 2.5mm SC/ST/FC Ferrules
show options
STRIP TOOL 3-HOLE FIBEROPTIC
  • Run Fiber Brand Fiber Optic Jacket Stripper
    Features:
    Ideal for preparing fiber optic cabling for termination
    For use with both multimode and single mode fiber
    High-quality steel construction
    Comfortable yellow plastic grips
    Serrated blade
    Safety lock
    Spring design
    Three-hole construction
    Applications:
    Preparing fiber optic cable for connector termination
show options
SCISSORS FIBER KEVLAR YARN
  • Run Fiber Brand Fiber Optic Kevlar / Aramid Yarn Sheers
    Features:
    Ideal for preparing fiber optic cabling
    For use with both multimode and single mode fiber
    High-quality carbon steel construction
    Stylish orange rubber grips
    Designed for use with both right and left-handed users
    Micro-serrated blade reduces slippage
    Applications:
    Preparing fiber optic cable for connector termination
show options
VISUAL FAULT LOCATOR 2.5MM 1MW
  • Run Fiber Brand Fiber Optic Visual Fault Locator
    Features:
    1mW visible wave output
    Up to 5km max signal transmission
    Battery powered with 18 hour average battery life
    Built-in dust cap
    Metal construction
    Continuous wave & pulsed wave modes of operation
    650nm wavelength
    Compatible with SC, ST & FC style connectors
    Compatible with single mode & multimode fiber
    Applications:
    For locating out-of-spec bends & breaks in fiber
    For verifying proper fiber optic connector termination
    For toning & tracing fiber optic cable runs & strands
show options
VISUAL FAULT 2.5-1.25 ADAPTER
  • Run Fiber Brand VFL Adapter for LC Connectors
    Features:
    Adapts a 2.5mm connection to a 1.25mm connection
    Visual fault locators for us with LC style connectors
    For use with all makes of 2.5mm visual fault locators
    Compact size
    Applications:
    Secure Fiber Optic Network Patching and Routing
    Military, Cable TV and Satellite TV, Fortune 500
    LAN Networking
show options
Basic Cleerline SSF Fiber Termination Kit
  • Termination Tooling Kit for SC and LC Connectors
  • Includes VFL, Cleaver, Scissors, Stripper
  • Ideally set up for SSF Fiber Termination
show options
SSF PROFESSIONAL FIBER TRM KIT
  • Termination Tooling Kit for SC and LC Connectors
  • Includes VFL Cleaver Scissors Stripper
  • Ideally set up for SSF Fiber Termination
    Applications:
show options
DATA LOGGING FIBER TESTER KIT
SSF-TKITP-400
  • Kit includes carrying case & strap
  • Tests both multimode and single mode fibers
  • Wavelengths of 850, 1300, 1310, and 1550nm
show options
more...