Full-Speed USB Extender Dongle - Host Side
The AVO-USB-H extenders transmit low speed USB 1.0, 1.1, and 2.0 signals up to 330 feet, and full speed USB 1.0, 1.1, and 2.0 signals up to 100 feet over twisted pair cabling. The AVO-USB-H is installed at a host location to connect peripherals from a remote client side extender.
The AVO-USB-H is plug-and-play, does not require driver software, and uses the same USB circuit as our other USB bus power devices for installation flexibility.
- USB 2.0 full speed 12Mbps, USB 1.1 legacy support
- Up to 330 feet cable lengths on U/UTP category 5/5e/6
- Not for USB 2.0 high speed
- No external power required, uses host device's 5V power
- USB "A" male (host) to RJ45 jack connectivity
- Requires compatible client end.
- ** Compatible with "New" Promethean ActivPanel Displays
- Uses any Cat5/5e/6/6A twisted pair cabling
- Extension of USB 1.1 and 2.0 full speed signals
- Plenum routing of USB 1.1 and 2.0 full speed
- Ideal for education, government, house of worship, corporate, residential, and any other application requiring extended USB signal distribution
PVC-coated Products; PVC-coated Wires and Cables
WARNING: This product can expose you to chemicals including DINP and/or DEHP, which are known to the state of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov or our information page: California Proposition 65.
AVO-USB-C
PMI-A9A
USB-WP-C-A
USB-WP-C-B
USB-WP-C-I
USB-WP-C-W
