Two Gang HDBaseT 2.0 HDMI / VGA and USB 2.0 transmitter wall plate

DL-1H1V1U-WP-W


List Product Options

Ordering Options

Sold Out!

Availability

No Longer Available

Product Options

You might also consider this alternate:

Sold Out
California Proposition 65
DL-1H1V1U-WP-W - Two Gang HDBaseT 2.0 HDMI / VGA and USB 2.0 transmitter wall plate

Product Overview

Features and Benefits

  • Extends HDMI, VGA w/audio, Analog Audio, and USB 2.0 up to 100m / 330’
  • Integrated RS232 controller can automatically or manually power on/off display
  • Supports resolutions up to 4K@60Hz 4:2:0 / 8 bit deep color
  • Supports HDCP 2.2
  • Pass-Through Analog audio port passes audio direct to audio output of receiver independent and regardless of video source
  • Auto Switching and Front Panel Input and Display on/off Selection
  • Supports remote PoE power from receiver
  • 2m USB A-A Cable included with wall plate
  • NOTE: Requires the use of the DL-HD2-RX or DL-HD2A-RX receiver
  • Compatibility note Some Promethean Interactive displays may require a firmware change be installed in this product prior to device installation. Please contact Liberty AV support if using a Promethean display prior to installation

Applications

  • K-12, Higher Education, & Meeting/Training Room Applications
  • Combine AV signal with USB for interactive displays, cameras, and other USB peripherals
  • Keyboard, Video, Mouse (KVM) applications
  • Conference / Training rooms extending USB Cam / Mic and AV signals


DL-1H1V1U-WP-W Summary

The DigitaLinx DL-1H1V1U-WP-W is a 2x1 auto switching HDBT 2.0 transmitter that supports the long distance transport of HDMI, VGA and USB 2.0 up to 70 meters / 230' using CAT6 cabling and features an HDMI, VGA with Audio and USB(A) input.

The DL-1H1V1U-WP-W gives you the ability to automate the display technology on whenever a video signal is introduced to the system on either the HDMI or VGA input. It will also turn the display technology off after a specified amount of time has passed when no video signal is present. It also gives you the ability to turn on/off display as well and switch from one input to another manually from the face plate.

The DL-1H1V1U-WP-W is ideal for situations where USB must be extended with HDMI or VGA for interactivity for items such as whiteboards for conference rooms or classrooms. The DL-1H1V1U-WP-W is compatible with the DL-HD2WP-RX HDBT 2.0 receiver.

DL-1H1V1U-WP-W Diagrams

DL-1H1V1U-WP-W_DL-HD2-RX AV DIAGRAM.pdf

No available cross references for DL-1H1V1U-WP-W

Alternatives for DL-1H1V1U-WP-W

Part Number Description
DL-2H1V1U-WP-WDigitalinx HDMI, VGA, and USB 2.0 Extender with Display Control

Download Hi-res Images


DL-1H1V1U-WP-W_2.png.pngDL-1H1V1U-WP-W_3.png.png

Supporting Documents

Diagram
Owners Manual
Quick Install Guide

DL-1H1V1U-WP-W Firmware

DL-1H1V1U-WP-W Software

DL-1H1V1U-WP-W Pre-made Drivers

Disclaimer: Liberty AV assumes no responsibility or liability for pre-built control system drivers. The driver may or may not work for all projects, in situations where the driver is not suitable for the switching architecture, the driver cannot be adjusted for customized usage by Liberty. If you would like to contract services for customized control for a project please contact your sales representative.

Required Products

Other Essential Products