HDMI over HDBaseT 70m extension complete set with flexible power and RS232 / IR control

HDMI over HDBaseT 70m extension complete set with flexible power and RS232 / IR control

Ordering Options

Pricing

Login for Your Price

Availability

Login for Availability

Product Options

Units:

Want to save some money?

We've got an "open-box" alternative for DL-HD70 (while supplies last) Click below to learn more.


You might also consider this alternate:

Add to Cart
DL-HD70 - HDMI over HDBaseT 70m extension complete set with flexible power and RS232 / IR control

Product Overview

Features and Benefits

  • HDMI transmission up to 230 feet (70m)
  • 1080p, 4Kx2K (UHD) & 3D compatible
  • CEC supported
  • Built-in surge protection
  • Diagnostic LEDs
  • HDCP 2.2 compliant
  • Bidirectional Wideband IR and RS232 passthrough
  • Flexible power design (use power supply at TX or RX)
  • Locking power connector (power supply included)

Applications

  • Uses any Cat6 or greater twisted pair cabling
  • Extension of HDMI and control signals
  • Limited access to power for extenders on both ends
  • Ideal for Digital Signage, Home Theater, Commercial Video

DL-HD70 Summary

The DigitaLinx DL-HD70 extender set transmits HDMI (1080p, 4Kx2K (UHD) & 3D) including HDCP 2.2, bidirectional IR, and RS232 up to 70 meters away using a single twisted pair cable.

Built-in surge protection and diagnostic LEDs ensure hassle-free and robust installations. Flexible power design allows the units to be powered at either the TX or RX end, and only one power supply is required. The 12 volt power supply is secured with a screw-on connector to prevent the power from being accidentally disconnected.

The DL-HD70 is sold only as a set. All accessories are included including two IR emitters, two IR receivers, and two pairs of mounting brackets with screws. The individual transmitter and receiver are not compatible with other HDBaseT devices due to proprietary PoE circuitry.

DL-HD70 Diagrams

DL-HD70 is comparable to:

Manufacturer Part Number
SnapAV B-500-EXT-230-RS
SnapAV B-520-EXT-230-RS
SnapAV KIT-500-230-SM-IRF

Alternates that meet or exceed DL-HD70 specifications

Part Number Description
DL-HD70-BSTK
HDMI over HDBaseT 70m extension complete set with flexible power and RS232 / IR controlHDMI over HDBaseT 70m extension complete set with flexible power and RS232 / IR controlHDMI over HDBaseT 70m extension complete set with flexible power and RS232 / IR controlHDMI over HDBaseT 70m extension complete set with flexible power and RS232 / IR controlHDMI over HDBaseT 70m extension complete set with flexible power and RS232 / IR controlHDMI over HDBaseT 70m extension complete set with flexible power and RS232 / IR controlHDMI over HDBaseT 70m extension complete set with flexible power and RS232 / IR control

Supporting Documents

DL-HD70 Installation Guide

Specifications

PDF Spec Sheet


Product Line:   DL-HD70
I/O Connections
HDMIOne (1) HDMI Type A Receptacle
Twisted PairOne (1) 8P8C port (Shielded RJ45)
IR InputOne (1) 3.5 mm TRS Jack
IR OutputOne (1) 3.5 mm TS Jack
RS232One (1) 3-Pole Euroblock connector
18V DC Power One (1) 5.5 mm Outside Diameter, 2.1 mm Inside Diameter Barrel (Locking)
Supported Audio, Video and Control
Maximum Video Compatibility70 m: Deep Color 36/30/24 Bit at 1080p
40 m: Deep Color 48 Bit at 1080p, 3D, and 4k x 2k (UHD) up to 30 Hz: RGB, YCbCr 4:4:4, YCbCr 4:2:2; up to 60 Hz: YCbCr 4:2:0
Video ComplianceHDMI, HDCP 2.2, and CEC (Consumer Electronics Control)
Embedded AudioUp to PCM 8 channel, Dolby Digital TrueHD, and DTS-HD Master Audio
Input DDC Signal5.0 volts p-p (TTL)
Input Video Signal0.5 to 1.0 volts p-p
Maximum HDMI Distance5 m (pre-made cable)
IR Carrier Frequency Range33-55kHz at 5 volts
RS232 Baud RateUp to 115200 baud
HDBaseT Signal Characteristics
Maximum Distance70 m
Cable RequirementsSolid core shielded Category 5e, Category 6 or greater with TIA/EIA-568B crimp pattern
Bandwidth10.2 Gbps
Gain0 dB – 10 dB at 100 MHz
Resolution Range800x600 – 1920x1200
Signal to Noise Ratio (SNR)> 70 dB at 100 MHz over 100 m
Return Loss< -30 dB at 5 KHz
Total Harmonic Distortion (THD)< 0.005% at 1 KHz
Min-Max Signal Level< 0.3 V – 1.45 Vp-p
Differential Phase Error±10° at 135 MHz over 100 m
Chassis and Environmental
EnclosurePainted steel
Dimensions135 mm x 74 mm x 15 mm (5.31 in x 2.91 in x 0.59 in)
Shipping Weight0.82 kg (1.8 lbs)
Operating Temperature (Environment)0° to +40° C (+32° to +104° F)
Operating Temperature (Chassis)31° C (88° F) (S); 38° C (100° F) (R)
Operating Humidity (Environment)20% to 90%, Non-condensing
Storage Temperature (Environment)-10° to +60° C (+14° to +140° F)
Storage Humidity (Environment)20% to 90%, Non-condensing
Power, ESD, and Regulatory
Maximum Power Consumption3 watts (S), 6 watts (R)
Power Supply18V DC
ESD Protection15kV
RegulatoryCE, RoHS
Other
Standard Warranty2 Years
Diagnostic IndicatorsPower, Status, Link, and HDCP LEDs
Included ItemsInstallation Guide, power supply, US power cord, IR emitters (2 ea), IR receivers (2 ea), mounting “L” brackets (4 ea), mounting screws (4 ea)
Distances and picture quality may be affected by cable grade, cable quality, source and destination equipment, RF and electrical interference, and cable patches.

DL-HD70 Firmware

DL-HD70 Pre-made Drivers

Other Essential Products