DigitaLinx

Simply put, DigitaLinx exists for one reason, to make your life easier.

DigitaLinx - Easy, Solid, Affordable Digital Solutions

We get it, time is money, Why not finish an install in record time, and save money while doing it? Featuring HDMI extenders that can be powered from either end, slim enough to get mounted behind a flat panel, and boasting features like ethernet passthrough, DigitaLinx products don't sacrifice technology for price.

Learn about our newest DigitaLinx products.

The DigitaLinx DL-SE3H1V-C is a 4K compatible, 4 input multi format A/V auto switcher, extender and video scaler system that supports long distance transport of HDMI between transmitter and receiver up to 70 meters / 230’ using Cat6 cabling. Read more...

The DigitaLinx DL-HD2100 is an 18G HDMI 2.0 extender over category cable that can transport data rates up to 18Gbps up to 100 meters. The system uses 2:1 data compression when the signal surpasses 10Gbps, anything under 10Gbps will never be compressed. In addition to extending high bandwidth HDMI signals, the extension system will extend IR, RS232, digital audio, Ethernet, and is ARC compatible. System supports flexible power so entire extender circuit can be powered by either the TX or RX side.

The DigitaLinx DL-S22 is a two input by two output slim HDMI matrix with Ultra HD 4K support. The DL-S22 is HDCP 1.4 compliant and supports resolutions up to 4K@30Hz and 1080p@60Hz. Built-in diagnostic LEDs ensure hassle-free and robust installations. Read more...

The DigitaLinx DL-A31 is a three input by one output slim HDMI matrix with Ultra HD 4K support. The DL-A31 is HDMI 2.0, HDCP 2.2, and DVI 1.0 compliant. The matrix switcher supports resolutions up to 4k/60Hz, 4:2:0, 8 bit deep color. Read more...

The DigitaLinx DL-A51 is a five input by one output slim HDMI matrix with Ultra HD 4K support. The DL-A51 is HDMI 2.0, HDCP 2.2, and DVI 1.0 compliant. The matrix switcher supports resolutions up to 4k/60Hz, 4:2:0, 8 bit deep color. Read more...

The DigitaLinx DL-HD50C is an HDMI Extender over Single Cat5e/6 with IR up to a distance of 164ft/50m. The DL-HD50C features EDID management, which allows and encourages source and display “handshake” for seamless integration. Deep color video, 1080p High Definition resolution, DTS-HD or Dolby TrueHD audio are supported with this extender.  Read more...

The DL-44E-KIT is a professional 4K HDBaseT home distribution hub kit, which consists of a 4K HDBaseT matrix switcher, 3 HDBaseT receivers and accessories. The DL-44E-KIT is a professional 4x4 HDBaseT matrix switcher that consist of the following inputs and outputs: 4 HDMI IN (4kx2K@60Hz signal at max), 3 IR IN, 1 IR EYE, 4 IR OUT, 3 HDBaseT OUT, 1 HDMI OUT, 1 SPDIF OUT, 1 L&R RCA OUT, and TCP/IP, RS232 control port via phoenix connector. The DL-44E-KIT offers manual HDCP management and auto-detecting along with easy installation with rack-mounting design. Read more...

The DigitaLinx DL-FHD2 is a two fiber 18G HDMI extender that will allow you to run HDMI 2.0 signals up to 18Gbps up to a 1000'. In addition to extending high bandwidth HDMI signals, the DL-FHD2 will extend IR and RS232 control and is ARC compatible. The DL-FHD2 requires the use of a duplex LC multimode OM3 fiber optical cable to extend HDMI and control.

Liberty’s DL‐HDM‐M Series are Active Optical Cables (AOC) featuring a unique hybrid construction and construction the industry has been waiting for. The cable strain relief is anchored into the connector housings to prevent inadvertent damage so common in other AOC cables. The DL‐HDM‐M series is the most efficient HDMI AOC design, featuring full 18G data rates, this cable will support 4K@60Hz 4:4:4 Chroma Sampling and High Dynamic Range applications.  Read more...

The DigitaLinx DL-VHD is a VGA to HDMI converter that converts computer video and stereo audio to HDMI. The DL-VHD VGA input supports resolution up to 1920x1200@60Hz along with HDMI output support of HDMI 1.4. The DL-VHD features fixed EDID mode and superior ESD protection. The DL-VHD is a Plug and Play device which allows for a hassle free install.

The IPEX2001/2002 transmits HDMI video and audio over a gigabit IP network using h.264 AVC encoding with a data rate up to 30 Mbps. The IPEX2001 supports video signals up to 1920x1200 at 60 Hz. The IPEX2001 outputs two video streams: one large IP stream at the native content resolution and a smaller video stream at 352x288 at 5 Hz to easily view a preview of the content on PC software or an iPad. An analog audio output port de-embeds the audio from the HDMI content, while still streaming the audio with the video content.  Read more...

The IPEX2001/2002 transmits HDMI video and audio over a gigabit IP network using h.264 AVC encoding with a data rate up to 30 Mbps. The IPEX2001 supports video signals up to 1920x1200 at 60 Hz. The IPEX2001 outputs two video streams: one large IP stream at the native content resolution and a smaller video stream at 352x288 at 5 Hz to easily view a preview of the content on PC software or an iPad. An analog audio output port de-embeds the audio from the HDMI content, while still streaming the audio with the video content.  Read more...

The DigitalinxIP IPEX5001/5002 transmits
HDMI video and audio over a gigabit IP
network using JPEG2000 encoding. The
IPEX5001 supports video signals up
to 4K at 60 Hz 4:2:0 with HDCP 2.2 and 7.1
multichannel audio. An analog audio input
port embeds the audio with the video
content, such as a DVI video source.
The IPEX5001/5002 supports PoE and
can be powered remotely by compatible
power source equipment, such as a PoE
Ethernet switch, eliminating the need for
a nearby power outlet. The RS232 port
relays commands from the IP controller
and operates in a pass-through capacity
to control a third party device such as
a projector. The USB connection passes
keyboard and mouse signals from the
IPEX5002 decoder to the IPEX5001.

The DigitalinxIP IPEX5001/5002 transmits
HDMI video and audio over a gigabit IP
network using JPEG2000 encoding. The
IPEX5001 supports video signals up
to 4K at 60 Hz 4:2:0 with HDCP 2.2 and 7.1
multichannel audio. An analog audio input
port embeds the audio with the video
content, such as a DVI video source.
The IPEX5001/5002 supports PoE and
can be powered remotely by compatible
power source equipment, such as a PoE
Ethernet switch, eliminating the need for
a nearby power outlet. The RS232 port
relays commands from the IP controller
and operates in a pass-through capacity
to control a third party device such as
a projector. The USB connection passes
keyboard and mouse signals from the
IPEX5002 decoder to the IPEX5001.

The DigitalinxIP IPEXCB is an IP control box that is used as an A/V control device for controlling, configuring and managing encoders and decoders on the local area network. It integrates two Ethernet ports and two RS232 ports, offering integration-friendly control features, including a web GUI . It also can be used with a third party controller to provide a simple, flexible control and management options.  Read more...

The DigitaLinx DL-HD70LS extender set transmits HDMI (1080p, 4Kx2K (UHD) & 3D), including HDCP 2.2, and bidirectional IR up to 70 meters away using a single solid core, shielded Category 5e twisted pair cable.
Built-in surge protection helps ensure hassle-free and robust installations. The 12 volt power supply is secured with a screw-on connector to prevent the power from being accidentally disconnected.
The DL-HD70LS is sold only as a set. The individual transmitter and receiver are not compatible with other HDBaseT devices due to proprietary PoE circuitry.

The DL-AS31-2H1V is a multiformat auto-switcher with two HDMI inputs, one VGA with analog audio input, one HDMI output, and one balanced analog audio output. This auto-switcher supports HDMI video resolutions up to 4Kx2K at 30 Hz and multichannel audio and VGA video resolutions up to 1920x1200 at 60 Hz. In addition to passing EDID information from the display, there are multiple built-in EDID settings to simplify an installation. The DL-AS31-2H1V will de-embed the digital audio from the HDMI output signal, and output it via the balanced analog audio output port. Read more...

The Digitalinx DL-HDCOAX is an HDMI over Coax extender that accommodates distances up to 100 meters (328ft). The DL-HDCOAX supports resolutions up to 1080p and 48KHz Digital Audio.  Read more...

This Digitalinx™ Digital Media Converter is an externally powered digital HDMI and DVI Media Converter system to send HDMI and DVI over standard Category Cable, unshielded or shielded. The unit uses an included 5 VDC power source. The unit supports Audio Return Channel (ARC), Ethernet, 3D, Deep Color, and CEC protocols with an increased bandwidth to 2.25 Gbps per TMDS channel for a total throughput of 6.75 Gbps. This unit supports DVI applications. Read more...

The DL-USB3.0 is a USB 3.0 active copper cable that offers extension up to 15 meters. The DL-USB3.0 is bus powered from the host PC side and USB 3.0 power connector is available if additional power is required. The DL-USB3.0 supports USB 3.0 throughputs up to 5Gbps, locking USB connector, rugged grade cabling and slot port for convenient cable tie mounting. The DL-USB3.0 supports only USB 3.0 devices. USB 2.0 and 1.1 devices will not function using this extender.

The DigitaLinx DL-AS61 is a compact multi-format switcher with support for video resolutions up to UHD (3840x2160). With multiple built-in EDID settings, including an EDID pass-through option, the highest quality digital video signal will be routed directly to the display. When a VGA video signal is connected, the video signal will be scaled up to 1920x1200.  Read more...

The DL‐HFC Hybrid Active Optical HDMI® Cable is a Plenum Rated High Speed HDMI® product featuring a very low profile hybrid copper/fiber bulk cable, detachable HDMI heads for ease of pulling in very small and tight locations, and unbeatable performance. The product is capable ofsupporting digital multimedia data rates up to 10.2 Gbps. This permits this product to support full HDMI 2.0 resolutions of 4K@30Hz 4:4:4 and 4K@60Hz 4:2:0. The fiber optic technology utilized in this product is fully HDCP 2.2 compliant.  Read more...

The DigitaLinx DL-HDE100 extender set transmits HDMI (1080p, 4Kx2K (UHD) & 3D) including HDCP 2.2, Ethernet, bidirectional IR, and RS232 up to 100 meters away using a single twisted pair cable.

Built-in surge protection and diagnostic LEDs ensure hassle-free and robust installations. Flexible power design allows the units to be powered at either the TX or RX end, and only one power supply is required. The 12 volt power supply is secured with a screw-on connector to prevent the power from being accidentally disconnected.

The DL-HDE100 is sold only as a set. All accessories are included including two IR emitters, two IR receivers, and two pairs of mounting brackets with screws. The individual transmitter and receiver are not compatible with other HDBaseT devices due to proprietary PoE circuitry.

The new DL-S41 is a small format auto-switcher with four HDMI video inputs and one HDMI output. This switcher supports HDMI video resolutions up to 4K (3840x2160) at 30 Hz, 1080p 3D, and multichannel audio. In addition to passing EDID information from the display, there are multiple built-in EDID settings to simplify an installation. The DL-S41 will de-embed digital stereo audio to provide an analog audio source for an existing audio system. This switcher also features audio return channel (ARC) support through the analog audio output. Read more...

The Digitalinx DL-USB2 products will extend a Hi-Speed USB 2.0 signal (480 Mbps) up to 100 meters (328 feet). The modular extenders may be powered on either end for low power devices such as keyboards or mice. For remote devices which require more power, the client side extender will require to be powered. Read more...

The Digitalinx DL-USB2 products will extend a Hi-Speed USB 2.0 signal (480 Mbps) up to 100 meters (328 feet). The modular extenders may be powered on either end for low power devices such as keyboards or mice. For remote devices which require more power, the client side extender will require to be powered. Read more...

The Digitalinx DL-USB2 products will extend a Hi-Speed USB 2.0 signal (480 Mbps) up to 100 meters (328 feet). The extenders may be powered on either end for low power devices such as keyboards or mice. For remote devices which require more power, the client side extender will require to be powered. Read more...

The Digitalinx DL-USB2 products will extend a Hi-Speed USB 2.0 signal (480 Mbps) up to 100 meters (328 feet). The extenders may be powered on either end for low power devices such as keyboards or mice. For remote devices which require more power, the client side extender will require to be powered. Read more...

The DigitaLinx DL-HDV is an HDMI to VGA converter designed to connect digital video sources to an analog display or projector. The DL-HDV supports HDTV video resolutions up to 1080p and VESA video resolutions up to 1920x1200. Only non-encrypted signals will be converted and passed through the device to comply with HDCP specifications. Power for the converter is supplied by the VGA display; a secondary power supply is not required. Read more...

The DigitaLinx DL-DAC2 is a PCM two channel to stereo audio converter. The DL-DAC2 features optical and digital coaxial input audio connections. Analog output is simultaneously available on the 3.5mm jack and the stereo RCA jacks.

The DigitaLinx DL-DAC6 is a surround sound to stereo audio converter. The DL-DAC6 features optical and digital coaxial input audio connections. Analog output is simultaneously available on the 3.5mm jack and the stereo RCA jacks. The DL-DAC6 features a switch to specify which audio input is being used.

The DigitaLinx DL-HD70 extender set transmits HDMI (1080p, 4Kx2K (UHD) & 3D) including HDCP 2.2, bidirectional IR, and RS232 up to 70 meters away using a single twisted pair cable. Read more...

Don't be a loser - Eliminate your customer's panic & expense when presentation adapters go missing or get lost! Our patent-pending tensile aircraft strength ring & clamp locks on the HDMI cable going to your display keeping any adapter you may need is at your fingertips. Read more...

Don't be a loser - Eliminate your customer's panic & expense when presentation adapters go missing or get lost! Our patent-pending tensile aircraft strength ring & clamp locks on the HDMI cable going to your display keeping any adapter you may need is at your fingertips. Read more...

Don't be a loser - Eliminate your customer's panic & expense when presentation adapters go missing or get lost! Our patent-pending tensile aircraft strength ring & clamp locks on the HDMI cable going to your display keeping any adapter you may need is at your fingertips. Read more...