- USB 2.0 full speed 12Mbps, USB 1.1 legacy support
- Up to 330 feet cable lengths on U/UTP category 5/5e/6
- Not for USB 2.0 high speed
- USB 2.0 full speed 12Mbps, USB 1.1 legacy support
- Up to 330 feet cable lengths on U/UTP category 5/5e/6
- Not for USB 2.0 high speed
- Extends USB High-Speed (480 Mbps) up to 100 m (330 ft) & supports isochronous data for use with USB Cameras
- Includes transmitter and receiver
- Can be powered at either the client or host device
- Extends USB2.0 High-Speed (480 Mbps) up to 100 m (330 ft) & supports isochronous data for use with USB Cameras
- Powered at the client device
- Four port client side supplies 500mA to USB devices
- Complete set includes TX, RX, Power supply
- Extend HDMI up to 4K, USB2.0, & Analog Audio signals up to 70 meters. HDCP2.2 Compliant
- Extends RS232 & 2 way flexible power
- HDMI 1.4b, HDCP 2.2 and HDCP 1.4 compliant
Video up to 4K2K@30Hz (4:4:4) and 4K2K@60Hz (4:2:0) 10.2G
Supports all HDMI audio formats
Single Cat6/6a cable up to 40 meters for 4K and 70 meters
for 1080P
HDR, CEC pass-through
Dedicated 3.5mm analog audio transmission channel,
independent with HDMI signal
24V POC, Power Supply for RX only
TX is standard US 1-Gang size
Supports USB 2.0 transmission
- Digitalinx HDMI, VGA, and USB 2.0 Extender with Display
Control
Features:
Auto Switches & Extends HDMI, Analog Audio, and USB 2.0 up
to 100m / 330’
Integrated RS232 controller can automatically or manually
power on/off display
Supports resolutions up to 4K@60Hz 4:2:0 / 8 bit deep color
Supports HDCP 2.2
Pass-Through Analog audio port passes audio direct to audio
output of receiver independent and regardless of video
source
Auto Switching and Front Panel Input and Display on/off
Selection
Supports remote PoE power from receiver
NOTE: Requires the use of the DL-HD2A-RX receiver
Compatibility note ** Now Supporting "New" ActivPanel
displays from Promethean!! Please contact Liberty support
for more information!
Applications:
Education, Classroom, training room, corporate, conference
room
Anywhere HDMI switching/extension and USB extension is
required including interactive display control extension,
collaboration cameras, and mics
- DigitaLinx Autoswitching Wallplate with 3 HDMI inputs
Features:
3 HDMI inputs with analog audio input
Auto switching with video detection technology;
One analog audio passthrough to receiver
4Kx2K@60Hz 4:2:0 Chroma subsampling) output up to 100m
HDMI 2.0 and HDCP 2.2 compliance.
USB 2.0 up to 480Mbps over HDBaseT 100m
2Gang US Decora wallplate
Ethernet and IR passthrough over HDBaseT
With POE support to be powered by any HDBaseT device with
PSE
Applications:
- Extends USB High-Speed (480 Mbps) up to 100m (330ft)
- Supplies power to the host side
- Uses any Cat5e/6/6A twisted pair cabling
- Extends USB Hi-Speed (480 Mbps) up to 100 m (330 ft)
- Powered from client side extender
- Uses any Cat5e/6/6A twisted pair cabling
- Extends USB Hi-Speed (480 Mbps) up to 100 m (330 ft)
- Supplies power to the host side
- Uses any Cat5e/6/6A twisted pair cabling
- Extends USB High-Speed (480 Mbps) up to 100m (330ft)
- Must be powered by client side
- Uses any Cat5e/6/6A twisted pair cabling
- Expansion: Extend up to two USB 2.0 peripherals 50 meters, way beyond the typical 5-meter limitation by only using one CAT6 cable. Connect various USB peripherals to your laptop or personal computer such as web cameras, microphones, cable cards and disk drives.
- Compliance: Gen USB 2.0 while being fully backways compatible with USB 1.1
- Data Transfer Rate: Up to 480 Mbps shared between all ports
- Expansion: Extend up to two USB 2.0 peripherals 50 meters, way beyond the typical 5-meter limitation by only using one CAT6 cable. Connect various USB peripherals to your laptop or personal computer such as web cameras, microphones, cable cards and disk drives.
- Compliance: Gen USB 2.0 while being fully backways compatible with USB 1.1
- Data Transfer Rate: Up to 480 Mbps shared between all ports