- Fully Routable zero latency HDMI 2.0 signals up to 4K60 4:4:4 over standard 10GbE Network
- Follows 10Gbps Ethernet networking standards, can extend full 4K60 18Gbps resolutions and capability up to 100 meters using CAT6A cable
- Transceiver modes; encoder, decoder or transceiver. Transceiver can act as an encoder and a decoder at the same time, perfect for remote sources
- Fully Routable zero latency HDMI 2.0 signals up to 4K60 4:4:4 over standard 10GbE Network
- Follows 10Gbps networking standards and can extend full 4K60 18Gbps resolutions and capability up to 300 meters using OM3 Duplex Fiber cable with LCLC connectors
- Includes 10GbE GBIC SFP+ Transceiver Module for OM3 LCLC Duplex Fiber
- HDMI video and audio over a gigabit IP network using JPEG2000 encoding
- Video signals up to 4K HDR (static) with HDCP 2.2 and 7.1 multichannel audio
- Up & Down scaling capability up to 4K
- HDMI video and audio over a gigabit IP network using JPEG2000 encoding
- On ramps two channel stereo audio either from the embedded HDMI audio stream or the analog audio 3.5mm input onto a Dante audio network
- Multicast video and Dante audio IP streams are integrated into one Ethernet cable simplifying networked audio and video solution into one.
- HDMI video and audio over a gigabit IP network using JPEG2000 encoding
- Video signals up to 4K @60Hz 4:2:0 with HDCP 2.2 and 7.1 multichannel audio
- Supports Static HDR (HDR10)
- Requires the legacy controller IPEXCB to work with other Digi IP 2000/2100 devices
- Transmits HDMI video and audio over a 1Gb network infrastructure using H.264 AVC encoding with a data rate up to 30 Mbps
- Supports video signals up to 1920x1200 at 60 Hz
- Transmits HDMI video and audio over 1Gb network infrastructure using H.264 AVC encoding with a data rate up to 30 Mbps
- Supports video signals up to 1080p@60 Hz
- An analog audio output port de-embeds the audio from the HDMI content, while still streaming the audio with the video content
- Decodes HDMI video and audio over a 1Gb network infrastructure using H.264 AVC encoding with a data rate up to 30 Mbps
- Supports video signals up to 1080p@60 Hz
- Integrated auto scaler for scaling up to 1080P
- Requires the legacy controller IPEXCB to work with other Digi IP 2000/2100 devices
- H.264 AV over IP Multi-View Decoder showing up to 9 sources on a single display
- Supports up to 9x (in tile mode) & 6x (in overlay mode) video streams