HDMI Slim 100M, POH, IR and Control HDBaseT Extender - Receiver

Ordering Options

Pricing

Login for Your Price

Availability

Login for Availability

Product Options

Units:

Want to save some money?

We've got an "open-box" alternative for INT-HDX100-RX (while supplies last) Click below to learn more.


Add to Cart
INT-HDX100-RX - HDMI Slim 100M, POH, IR and Control HDBaseT Extender - Receiver

Product Overview

Features and Benefits

  • Extends HDMI over a single solid core shielded Category 5e or greater cable using the Valens VS100TX HDBaseT chip
  • Supports 1080p, full 3D or 4k x 2k video signals up to 100 meters (328 feet) including multichannel audio and HDCP 1.4/2.2
  • Built-in surge protection and diagnostic LEDs
  • Power over HDBaseT (PoH)
  • Bidirectional IR and RS232
  • Ethernet pass-through
  • 2-port network switch.

INT-HDX100-RX Summary

The Intelix INT-HDX100-RX extends HDMI over a single solid core shielded Category 5e or greater cable using the Valens VS100RX HDBaseT chip. The INT-HDX100-RX supports 1080p, full 3D or 4k x 2k video signals up to 100 meters (328 feet) including multichannel audio and HDCP 1.4/2.2. Built-in surge protection and diagnostic LEDs ensure hassle-free and robust installations. Key features of the new extender series include , power over HDBaseT (PoH), bidirectional IR, bidirectional RS232, and Ethernet pass-through with a 2-port network switch.

Flexible power design allows the INT-HDX100 series extenders to be powered at either the TX or RX end, and only one power supply is required. The power supply is included with the extender. The bidirectional wideband IR, bidirectional RS232, and Ethernet pass-through capabilities make the INT-HDX100 compatible with most control systems. The IR emitter (DIGIB-EMT) and IR receiver (DIGIB-EYE) are sold separately. The two-port network switch on the INT-HDX100-RX allows a second device to share the 100BaseT Ethernet pass-through connection without adding additional hardware to the installation.

The INT-HDX100 series extenders are compatible with all Intelix HDBaseT product offerings and any product that meets the HDBaseT specifications.

INT-HDX100-RX Diagrams

No available cross references for INT-HDX100-RX

Alternates that meet or exceed INT-HDX100-RX specifications

No equivalent alternates available for INT-HDX100-RX

.
HDMI Slim 100M, POH, IR and Control HDBaseT Extender - ReceiverHDMI Slim 100M, POH, IR and Control HDBaseT Extender - Receiver

Supporting Documents

INT-HDX100 Install Guide

Specifications

PDF Spec Sheet


Product Line:   INT-HDX100-RX
Input/Output Connections
HDMI OutputOne (1) HDMI Type A Receptacle
HDBaseT PortOne (1) 8P8C port (Shielded RJ45)
EthernetTwo (2) 8P8C port (Shielded RJ45)
PowerOne (1) 5.5 mm OD, 2.6 mm ID Threaded Barrel
RS232 PortOne (1) 3-pin Removable Terminal Block Connector
IR InputOne (1) 3.5 mm TRS Receptacle
IR OutputOne (1) 3.5 mm TRS Receptacle
Supported Audio, Video and Control
Video ResolutionsSMPTE: 480i, 480p, 576i, 576p, 720p, 1080i, 1080p, UHD/30
VESA: Resolutions up to 1920x1200
Color Depth: 24, 30, 36, 48bit
Maximum Video Compatibility at 100 mDeep Color 48/36/30/24 Bit at 1080p, 3D, UHD/30
Video ComplianceHDMI 1.4 and HDCP 1.4/2.2
Embedded AudioUp to PCM 8 channel, Dolby Digital TrueHD, and DTS-HD Master Audio
ARC (Audio Return Channel)No
HEC (HDMI Ethernet Channel)No
CEC (Consumer Electronics Control)Yes (Pass-through Only)
Supported Baud Rates2400, 4800, 9600, 19200, 38400, 57600, 115200
Supported IR Carrier Frequencies33 to 55 kHz
Ethernet100BaseT
HDBaseT Signal Characteristics
Maximum Distance100 m (328 ft)
Cable RequirementsContinuous shielded solid core Cat 5e or greater with TIA/EIA-568B crimp pattern (no couplers in-line)
Bandwidth10.2 Gbps
HDBaseT ChipsetVS100RX
Chassis and Environmental
ConstructionBlack Alumininum
Dimensions (H x W x D)16.2 mm x 152 mm x 84 mm (0.64 in x 5.98 in x 3.31 in)
Operating Temperature0° to +40° C (+32° to +104° F)
Operating Humidity20% to 90%, Non-condensing
Storage Temperature-10° to +60° C (+14° to +140° F)
Storage Humidity20% to 90%, Non-condensing
Power and Regulatory
Power Input24V DC 1.25A or 48V DC PoH (Power over HDBaseT)
Power Output48V DC PoH (Power over HDBaseT)
Power over Ethernet (PoE) Compatibility802.3af Alternative A
Power Consumption5 watts
ESD Protection15kV air, 8kV contact
RegulatoryFCC, CE, RoHS
Other
Warranty2 years
Diagnostic IndicatorsHDCP, Link, and Power
Included AccessoriesInstallation Guide, Power Supply, 3-pin Removable Screw Terminal
Optional AccessoriesIR emitter (DIGIB-EMT), IR receiver (DIGIB-EYE), rack mount (INT-EXRMK), rack mounted power supply (PSU12)
HDBaseT Transmitter (A/V, PoE, Control) CompatibilityDIGI-HD60C-S, DIGI-HDX-S, FLX-64, INT-HD70-TX, INT-HDX100-TX, DIGI-1X4B-1H, FLX-44, INT-44HDX, INT-66HDX, INT-88HDX, AS-1H1V, AS-1H1V-WP, AS-1H1DP, AS-1H1DP-WP, AS-2H, AS-2H-WP, ASW-WP
HDBaseT Transmitter (A/V, Control) CompatibilityFLX-BO4A, DIGI-P123, DIGI-44B, DIGI-88B
HDBaseT Transmitter (A/V and PoE) CompatibilityDIGI-HD60-S, DIGI-HD60-WP-S
Distances and picture quality may be affected by cable grade, cable quality, source and destination equipment, RF and electrical interference, and cable patches.

INT-HDX100-RX Firmware

INT-HDX100-RX Software

INT-HDX100-RX Pre-made Drivers

Other Essential Products