Logo

IPEX5001-D-BSTK Summary

The Digitalinx IP IPEX5001-D transmits HDMI video and audio over a 1 gigabit network infrastructure using JPEG2000 encoding with a variable data rate at an average of 250 Mbps with peak values up to 850Mbps. The IPEX5001-D is Dante enabled meaning that the encoder can on ramp two channel stereo audio either from the embedded HDMI audio stream or the analog audio 3.5mm input onto a Dante audio network. The multicast video and Dante audio IP streams are integrated into one Ethernet cable simplyfing networked audio and video solution into one. An analog audio output port de-embeds stereo 2 channel audio from the HDMI two channel stereo embedded stream, while still passing stereo 2 channel audio to the HDMI output. The IPEX5001-D supports video signals up to 4K at 60 Hz 4:2:0 / 8 bit color with HDR10, HDCP 2.2.

The IPEX5001-D supports PoE power and can be powered remotely via PoE network switch eliminating the need for a nearby power outlet. The RS232 port relays commands from the IPEXCB controller and operates in a pass through mode to control a third party device such as a TV display or HDMI switcher. The USB host port connection is for connecting USB host devices such as a computer that is USB 2.0 Full Speed compliant up to 12Mbps that can communicate with client side devices connected to the decoder. USB routing follows the video route by default however USB communication can be free routed via API.

IPEX5001-D-BSTK Diagrams

5000 SERIES SYSTEM DIAGRAMS

No available cross references for IPEX5001-D-BSTK

Alternatives for IPEX5001-D-BSTK

No equivalent alternates available for IPEX5001-D-BSTK

Download Hi-res Images

IPEX5001-D-BSTK Firmware

IPEX5001-D-BSTK Software

IPEX5001-D-BSTK Pre-made Drivers

Disclaimer: Liberty AV assumes no responsibility or liability for pre-built control system drivers. The driver may or may not work for all projects, in situations where the driver is not suitable for the switching architecture, the driver cannot be adjusted for customized usage by Liberty. If you would like to contract services for customized control for a project please contact your sales representative.