DigitalinxIP 5000 Series AV Over IP HDMI / VGA auto Switching Wall Plate Encoder
4K 2 gang Wallplate format compatible with 5000 Series Digitalinx IP Systems. HDMI/VGA Auto switching
IPEX5001-WP-W
Product Overview
Features and Benefits
- Encode & extend audio / video, USB, IR, RS232, and power over category cable and IP network up to 100m
- 2 gang wall plate format compatible with 5000 series DigitalinxIP systems
- HDMI and VGA/A input auto switching
- Supports resolutions up to 4K, HDR10, and multi-channel Audio
- HDCP 2.2 compliant
- Extend USB2.0 full speed up to 12Mbps
- Dual power option, PoE or DC power input
- Mix and match wall plate and standard IPEX5001 encoders throughout a 5000 system system
Applications
- Audio, video, and control distribution and routing
- Collaboration, education, boardrooms, video wall, digital signage, AV over IP
- Enterprise AV routing and management
IPEX5001-WP-W Summary
The Digitalinx IP IPEX5001-WP-W transmits HDMI or VGA video and audio over a 1 gigabit network infrastructure using JPEG2000 encoding with a variable data rate at an average of 250 Mbps with peak values up to 850Mbps. The IPEX5001-WP-W supports video signals up to 4K at 60 Hz 4:2:0 / 8 bit color with HDR10, HDCP 2.2 and multichannel audio support. An analog audio input port embeds analog audio with the video content, such as a DVI video source. An analog audio output port de-embeds stereo 2 channel audio from the HDMI content, while still passing stereo 2 channel audio to the HDMI output. The HDMI and VGA inputs on the IPEX5001-WP-W are auto switching and follow the last in / first out method and must be physically connected / disconnected to engage the auto switch.
The IPEX5001-WP-W supports PoE power and can be powered remotely via PoE network switch eliminating the need for a nearby power outlet. The RS232 port relays commands from the IPEXCB controller and operates in a pass through mode to control a third party device such as a TV display or HDMI switcher. The USB host port connection is for connecting USB host devices such as a computer that is USB 2.0 Full Speed compliant up to 12Mbps that can communicate with client side devices connected to the decoder. USB routing follows the video route by default however USB communication can be free routed via API. The IPEX5001-WP-W features a built in IR receiver built in on the plate.
IPEX5001-WP-W Diagrams
No available cross references for IPEX5001-WP-W
Alternatives for IPEX5001-WP-W
No equivalent alternates available for IPEX5001-WP-W
.Download Hi-res Images
IPEX5001-WP-W Firmware
IPEX5001-WP-W Software
IPEX5001-WP-W Pre-made Drivers
Disclaimer: Liberty AV assumes no responsibility or liability for pre-built control system drivers. The driver may or may not work for all projects, in situations where the driver is not suitable for the switching architecture, the driver cannot be adjusted for customized usage by Liberty. If you would like to contract services for customized control for a project please contact your sales representative.
Required Products
|
IPEX5002
HDMI Over IP Decoder - Scalable 4K Solution over 1Gb Network w/ full Matrix & Video wall Capability |
Add to Cart
|
CXUnify
