Digitalinx Series 100M 18G 4K60 Extender Set with ARC/eARC
Uncompressed 18G 4K60 4:4:4 HDBaseT 3.0 extender set with eARC, Gigabit ethernet, Audio De-embedding, & control support
DL-HDE100ARC-H3
California Proposition 65
Product Overview
Features and Benefits
- Overview: Transmit flawless zero-latency Video up to 4K60 4:4:4, HDR10, Dolby Vision, Multi-Channel Audio, eARC / ARC, Pass Gigabit Ethernet, IR, & RS232 over one Category Cable up to 100 meters over Cat6a U/FTP or above.
- Transmitter Ports: Front panel led indicators, 2 x 3.5mm female jacks for IR communication, 1 x female HDMI type A, 1 x female HDBaseT 3.0 RJ45 port, 1 x female LAN RJ45 Gigabit ethernet port, 1 x female TOSLINK connector, 1 x Reset button
- Receiver Ports: Front panel led indicators, 2 x 3.5mm female jacks for IR communication, 1 x female HDMI type A, 1 x female HDBaseT 3.0 RJ45 port, 1 x female LAN RJ45 Gigabit Ethernet port, 1 x female TOSLINK connector, 1 x Reset button
- Video Resolutions: Supports a full range of resolutions up to 4K60 4:4:4
- Dynamic Metadata HDR: HDR formats such as Dolby Vision, HDR10, HLG
- Audio Protocols: DTS-HD, Dolby TrueHD, 7.1ch digital audio, Dolby Atmos, DTS-X, and all other digital audio standard formats
- eARC/ARC Support: ARC & eARC up to 8 channels from the Receiver back to the Transmitter which includes Dolby Atmos and DTS-X, TOSLINK supporting S/PDIF up to 5.1 channels. Toslink digital audio extension and Toslink audio de-embedding up to 5.1
- Control Protocols: Extend bi-directional IR, RS-232, CEC, and Ethernet
- Commercial Design: Eliminate cable clutter by extending multimedia signals using two metal chassis with vented slots for heat dissipation. Provided mounting brackets and screws allow you to mount the devices behind a display, inside a closet, on an equipment rack, or other various locations
- Compliance: HDBaseT 3.0, HDMI 2.0/1.4 backwards compatible, HDCP2.3/ 2.2/1.4 backwards compatible
- Ethernet Data Transfer Rate: Pass up to 1 Gigabit of Ethernet speed
- Power Over Cable (PoC) - PoC allows one power adapter placed on either side to power both the transmitter and receiver
- Package includes: HDMI HDBT3.0 eARC Extender Set (Transmitter & Receiver units,) two IR blasters, external power supply, mounting brackets, and user manual
- Complete Plug and Play: No additional setup or configuration
- Compatible HDMI Source Devices: HDMI sources, such as gaming consoles, AVRs, computer PCs, Blu-ray players, and media players
- Compatible HDMI Display (snyc) Devices: HDMI displays, monitors, projectors, and HDTVs
- Other: This kit is point-to-point and comes with a Transmitter and Receiver. It’s not intended to work through routers or network switches
- Cabling: For reliable, full featured performance, and to support all resolutions / capabilities of all HDBaseT 3.0 devices, shielded Cat6A U/FTP or above must be used.
- Country of Origin: Taiwan TAA Compliant
- Regulatory approvals: FCC, CE, RoHS
DL-HDE100ARC-H3 Summary
DL-HDE100ARC-H3 Diagrams
No available cross references for DL-HDE100ARC-H3
Alternatives for DL-HDE100ARC-H3
No equivalent alternates available for DL-HDE100ARC-H3
.DL-HDE100ARC-H3 Firmware
DL-HDE100ARC-H3 Software
DL-HDE100ARC-H3 Pre-made Drivers
Disclaimer: Liberty AV assumes no responsibility or liability for pre-built control system drivers. The driver may or may not work for all projects, in situations where the driver is not suitable for the switching architecture, the driver cannot be adjusted for customized usage by Liberty. If you would like to contract services for customized control for a project please contact your sales representative.
CXUnify
