Ordering Options


Login for Your Price


Product Options

Add to Cart
California Proposition 65
IPEX5002 - HDMI Over IP Decoder - Scalable 4K Solution over 1Gb Network w/ full Matrix & Video wall Capability

Product Overview

Features and Benefits

  • HDMI video and audio over a gigabit IP network using JPEG2000 encoding
  • Video signals up to 4K @60Hz 4:2:0 with HDCP 2.2 and 7.1 multichannel audio
  • Supports Static HDR (HDR10)
  • Analog audio output port de-embeds the audio from the HDMI signal
  • Supports PoE and can be powered remotely
  • RS232 port relays commands from the IP controller and operates in a pass-through capacity
  • IR in and out for 2 way IR control
  • USB connection passes keyboard and mouse signals from decoder to encoder
  • Integrated scaler with up & down scaling capability up to 4K30 4:4:4
  • Downscaling ability allows lower resolution displays to show 4k content
  • Supports Video walls up to 16x16 with Bezel Compensation
  • Free 3rd party control drivers available for download


  • Video Distribution, Digital Signage, Residential, Restaurant, Bar, Entertainment, Hospitality
  • Large Scale HDMI distribution
  • Video Wall
  • 4K Distribution

IPEX5002 Summary

The Digitalinx IP IPEX5002 receives HDMI video and audio over a 1 gigabit network infrastructure using JPEG2000 encoding from the IPEX5001 and IPEX5001-WP-W encoder. The IPEX5002 outputs video signals natively from source or can be scaled to 1080p or 4K at 24/30Hz 4:4:4 with HDR10, HDCP 2.2 and multichannel audio support. An analog audio output port de-embeds stereo 2 channel audio from the HDMI content while still passing stereo 2 channel audio to the HDMI output. Depending on the needs of the installation, multiple IPEX5002 devices can be configured to make a video wall up to a 16x16 configuration.

The IPEX5002 supports PoE power and can be powered remotely via PoE network switch eliminating the need for a nearby power outlet. The RS232 port relays commands from the IPEXCB controller and operates in a pass through mode to control a third party device such as a TV display or HDMI switcher. The USB client port connections is for connecting USB client devices such as an interactive white board or HID devices that is USB 2.0 Full Speed compliant up to 12Mbps that can communicate with the host device connected to an encoder. USB routing follows the video route by default however USB communication can be free routed via API. The IPEX5001 features bi-directional IR support which follows the video route or can be routed freely via API command.

The IPEX5002 requires a single IPEX5001 for a point to point installation. When multiple IPEX50012 and/or IPEX5001 devices are in a system, an IPEXCB control box will be required.

IPEX5002 Diagrams

DigitalinxIP 5000 Series System Diagrams.pdf

No available cross references for IPEX5002

Alternatives for IPEX5002

No equivalent alternates available for IPEX5002


Download Hi-res Images


Supporting Documents


Product Line:   IPEX5002

Input/Output Connections

HDMI Input

One (1) HDMI Type A Receptacle

HDMI Output

One (1) HDMI Type A Receptacle


One (1) 8P8C port (Shielded RJ45)


One (1) 5.5 mm OD, 2.6 mm ID Threaded Barrel

RS232 Port

One (1) 3-pin Removable Terminal Block Connector

USB Device

Two (2) USB Type A Port

Audio Output

One (1) 3.5 mm TRS Receptacle

IR Input

One (1) 3.5 mm TRS Receptacle

IR Output

One (1) 3.5 mm TRS Receptacle


One (1) Momentary Push Button


One (1) Two Position Slider Switch


One (1) Four Position DIP Switch

Supported Audio, Video and Control

Video Resolutions

SMPTE: 480p, 576p, 720p, 1080i, 1080p, 2160p/30 (4:4:4), 2160p/60 (4:2:0)
VESA: Resolutions up to 1920x1200
Color Depth: 24, 30, 36 bit

Video Compliance

HDMI 1.4/2.0 and HDCP 1.4/2.2

Embedded Audio

Up to PCM 8 channel, Dolby Digital True HD, and DTS-HD Master Audio

ARC (Audio Return Channel)


HEC (HDMI Ethernet Channel)


CEC (Consumer Electronics Control)


Supported Baud Rates

2400, 4800, 9600, 19200, 38400, 57600, 115200

USB Compliance

HID only

Streaming Signal Characteristics

Maximum Distance (point to point)

100 m (328 ft)

Cable Requirements

Category 5e or greater with TIA/EIA-568B crimp pattern

Encoded Data Rate

2160p: 250 Mbps

1080p: 150 Mbps

Encoded Method


End to End Latency

17-33 ms (1-2 fps)

Maximum Video Wall Size


Chassis and Environmental


Black Steel

Dimensions (H x W x D)

25 mm x 220 mm x 130.2 mm (0.98in x 8.66 in x 5.13 in)

Operating Temperature

0° to +40° C (+32° to +104° F)

Operating Humidity

20% to 90%, Non-condensing

Storage Temperature

-10° to +60° C (+14° to +140° F)

Storage Humidity

20% to 90%, Non-condensing

Power and Regulatory

Power Input

12V DC 1A or 48V DC PoE (Power over Ethernet)

Power over Ethernet (PoE) Compatibility

802.3af Alternative B

Power Consumption

6 watts

ESD Protection

8kV air, 4kV contact





2 years

Diagnostic Indicators

Power and Status

Included Accessories

Installation Guide, Power Supply, 3-pin Removable Screw Terminal, Mounting Ears (2 ea), IR emitter, IR receiver

IP Controller


Compatible Encoder


IPEX5002 Software

IPEX5002 Pre-made Drivers

Disclaimer: Liberty AV assumes no responsibility or liability for pre-built control system drivers. The driver may or may not work for all projects, in situations where the driver is not suitable for the switching architecture, the driver cannot be adjusted for customized usage by Liberty. If you would like to contract services for customized control for a project please contact your sales representative.

Other Essential Products