Logo

FLX-64 Summary

The Intelix FLX-64 was designed for use in conference rooms that have two in-room inputs extended to the rack, a few local sources at the rack, two discrete displays, a VTC codec, and a recorder.

The FLX-64 features four HDMI inputs, of which two allow analog audio embedding on balanced inputs. Two HDBaseT inputs are also provided. The HDBaseT inputs support 1080p HDMI video with audio, wide-band IR tunneling (for IR control of sources), RS232 routing, and HDCP up to 60 meters (196 feet). Each HDBaseT input port supplies power to the attached extender, eliminating the need for a power supply at the source end. All inputs feature selectable HDCP compliance and advanced EDID handling to address challenging system design parameters.

The FLX-64 features HDBaseT twisted pair extension for each output, and simultaneous HDMI on the first two outputs, allowing the same signal to be routed to the HDMI connector and a remote destination with an HDBaseT receiver. The HDBaseT ports support 1080p HDMI video with audio, wide-band IR tunneling (for IR control of displays), RS232 tunneling and routing, and HDCP up to 60 meters (196 feet). Each output features a stereo audio de-embedder for balanced connection to amplifiers or DSPs. Audio outputs feature breakaway capabilities, allowing audio from the sources to be sent to any output. Each HDBaseT output port supplies power to the attached extender, eliminating the need for a power supply at the display end.

The FLX-64 can be controlled via front panel buttons, front panel IR, external IR, remote IR through HDBaseT extenders, RS232, and Ethernet. Clear button caps provide legible text on the front panel, which can be customized for each installation. The matrix includes a simple IR remote control to allow IR switching. This IR remote control can be learned into universal remotes and IR based control systems. An IR All In port is provided, which allows one IR connection to control all four remote displays.

The matrix also features a full command set for RS232 and Ethernet control with third party control systems, plus control and system configuration via a web browser. RS232 commands to remote displays can also be embedded in the control stream through the matrix from both the RS232 and Ethernet control ports, which will reduce the number of serial ports required for the control system.

FLX-64 Diagrams

No available cross references for FLX-64

Alternates that meet or exceed FLX-64 specifications

No equivalent alternates available for FLX-64

FLX-64 Firmware

FLX-64 Software

FLX-64 Pre-made Drivers

Disclaimer: Liberty AV assumes no responsibility or liability for pre-built control system drivers. The driver may or may not work for all projects, in situations where the driver is not suitable for the switching architecture, the driver cannot be adjusted for customized usage by Liberty. If you would like to contract services for customized control for a project please contact your sales representative.