HDMI/VGA Auto-Switching Wallplate with HDBaseT Output

HDMI/VGA Auto-Switching Wallplate with HDBaseT Output

Product Overview

Features and Benefits

    This is a B-Stock item.

    B-Stock is fully refurbished to like-new operating condition and is comprised of previously-sold products that have been returned, or new products that have been used for demonstration purposes. Refurbished B-Stock products may have minor cosmetic blemishes. All products have been tested for performance and quality, and updated with the latest firmware. All products carry the full two-year warranty.

  • HDMI (including audio) and VGA/3.5mm Stereo input
  • HDBaseT output - 60m Max Distance
  • Automatically switches input to active video
  • RS232, Auto, and Dry Contact Closure for control of device
  • PoE (Power over Ethernet) or 5VDC local power (not included)
  • Display Control Software to control TV or projector with RS232 commands - automatically turns display on/off
  • Customizable power management system when not in use
  • Includes White faceplate kit


  • Uses any Cat6 or greater twisted pair cabling
  • Extension of HDMI and VGA with stereo audio to one HDMI destination
  • Ideal for boardroom, education, and hospitality installations


The Intelix ASW-WP is a two-gang, Decora-style wall plate designed to be the primary PC interface for classrooms, boardrooms, and conference centers. It features VGA + Audio to HDMI conversion and an HDMI input. The unit will detect which input has an active video input, and switch to that input – if both inputs are active, the “last in” will be selected. There are additional contact closure inputs provided on the rear of the unit to allow third party control. RS232 control of the ASW-WP can be accomplished by connecting to the RS232 port on a compatible receiver, such as a DIGI-HD60C-R.

The ASW-WP utilizes HDBaseT technology to extend the digital output up to 60 meters away using standard Cat6 cable. This transmitter device is compatible with several Intelix HDBaseT receivers, but is designed to work primarily with the DIGI-HD60C-R. The unit features multiple EDID modes to eliminate user confusion, and incompatible video formats.

The ASW-WP can be powered from the rear panel, or by Power over HDBaseT (PoH). Built-in surge protection and diagnostic LEDs ensure hassle-free and robust installations. The Auto-Switching Wallplate also features a customizable power management system, which will put the unit into a low power state after no video for 30 minutes or being inactive for 3 hours by default.

The ASW-WP can be programmed to control the connected display. The display manufacturer’s RS232 commands can be entered into the ASW-WP with the use of Intelix Display Control software. This allows display power and input to be automatically controlled based on video activity, eliminating the need for a third party control system in many installations.

No available cross references for ASW-WP-BSTK

Alternates that meet or exceed ASW-WP-BSTK specifications

No equivalent alternates available for ASW-WP-BSTK

HDMI/VGA Auto-Switching Wallplate with HDBaseT OutputHDMI/VGA Auto-Switching Wallplate with HDBaseT OutputHDMI/VGA Auto-Switching Wallplate with HDBaseT OutputHDMI/VGA Auto-Switching Wallplate with HDBaseT Output


Download PDF Spec Sheet
Product Line:   ASW-WP
I/O Connections
HDMI InputOne (1) HDMI Type A Receptacle (Front)
VGA InputOne (1) Female PC Video HD-15-F Connector (Front)
PC Stereo AudioOne (1) 3.5 mm TRS Receptacle (Front)
HDBaseT PortOne (1) 8P8C port (Shielded RJ45)
PowerOne (1) 2 Position Euroblock Connector
EDID DipswitchesThree (3) 2 position switches
Contact ClosuresOne (1) 4 position Euroblock Connector
Supported Audio and Video
HDMI Video ResolutionsSMPTE: 480i, 480p, 576i, 576p, 720p, 1080i, 1080p
VESA: Resolutions up to 4k
Color Depth: 24, 30, 36, 48bit
VGA Video ResolutionsSMPTE: 480p@60hz, 576p@60hz, 720p@60hz , 1080p@60hz
640x480, 800x600, 1024x768, 1280x768, 1280x800, 1280x1024, 1600x1200, 1680x1050, 1920x1200(RB) - @60hz
640x480, 800x600, 1024x768, 1280x1024 - @75hz
640x480, 800x600, 1024x768, 1280x1024 - @85hz
1024x768 - @70hz
640x480, 800x600 - @72hz
Maximum Video Compatibility at 60 mDeep Color 36/30/24 Bit at 1080p (HDMI Input)
Maximum Video Compatibility at 40 mDeep Color 48 Bit at 1080p, 3D (HDMI Input)
Video ComplianceHDMI and HDCP (Selectable)
HDMI Embedded AudioUp to PCM 8 channel, Dolby Digital TrueHD, and DTS-HD Master Audio
PC Embedded AudioAnalog stereo line-level (Converted to 2ch 24bit PCM 48kHz)
ARC (Audio Return Channel)No
HEC (HDMI Ethernet Channel)No
CEC (Consumer Electronics Control)Yes (HDMI Pass-through Only)
Baud Rate (Wall plate control)9600
Supported Baud Rates (Display Control)9600, 19200, 57600, 115200
HDBaseT Signal Characteristics
Maximum Distance60 m
Cable RequirementsCategory 5e, 6, or 6A with TIA/EIA-568B crimp pattern
Bandwidth10.2 Gbps
Gain0 dB – 10 dB at 100 MHz
Signal to Noise Ratio (SNR)> 70 dB at 100 MHz over 100 m
Return Loss< -30 dB at 5 KHz
Total Harmonic Distortion (THD)< 0.005% at 1 KHz
Min-Max Signal Level< 0.3 V – 1.45 Vp-p
Differential Phase Error±10° at 135 MHz over 100 m
Chassis and Environmental
ConstructionBlack painted metal plate (Back Cover)
Faceplate ColorsWhite, Almond (Sold Separately), Black (Sold Separately) – ABS Plastic
Dimensions114mm x 116mm x 35mm (4.49 in. x 4.57 in. x 1.38 in.)
Shipping Weight0.45 kg (1 lbs.)
Operating Temperature0° to +40° C (+32° to +104° F)
Operating Humidity20% to 90%, Non-condensing
Storage Temperature-10° to +60° C (+14° to +140° F)
Storage Humidity20% to 90%, Non-condensing
Power, ESD, and Regulatory
Power Supply5vDC 2A or PoE (Power over Ethernet)
Power Consumption10 watts
Automatic Standby Mode30 minutes no signal
ESD Protection16kV
RegulatoryCE, RoHS
Warranty2 years
Diagnostic IndicatorsFront Panel: Two (2) Bicolor LED: Blue, (Purple), Amber
HDBaseT: Three (3) SMDs: Heartbeat – Blue, Link – Yellow, HDMI – Green
Included AccessoriesWhite Faceplate Set and Installation Manual
HDBaseT Receiver (A/V, PoH, Control) CompatibilityDIGI-HD60C-R
HDBaseT Receiver (A/V, Control) CompatibilityDIGI-HDE-R, FLX-BI4
HDBaseT Receiver (A/V Only) CompatibilityDIGI-HD70-R
Distances and picture quality may be affected by cable grade, cable quality, source and destination equipment, RF and electrical interference, and cable patches. Intelix specifications are based on straight-through cabling with standard-grade Cat 5e unless noted otherwise.

Other Essential Products