DigiIP 6000 Series SDVoE AV over IP Transceiver RJ45 / Copper w/ PoE

Uncompressed 4K AV over IP Transceiver w/ Video wall and Multi-view ability

IPEX6000TC-C


Ordering Options

Pricing

Login for Your Price

Availability

Product Options

Units:
Add to Cart

Have Tech Questions?
California Proposition 65

Product Overview

Features and Benefits

  • Fully Routable zero latency HDMI 2.0 signals up to 4K60 4:4:4 over standard 10GbE Network
  • Follows 10Gbps Ethernet networking standards, can extend full 4K60 18Gbps resolutions and capability up to 100 meters using CAT6A cable
  • Transceiver modes; encoder, decoder or transceiver. Transceiver can act as an encoder and a decoder at the same time, perfect for remote sources
  • Supports HDR10+ & Dolby Vision
  • Supports Multi-Channel audio up to 7.1
  • Extends 1Gbps Ethernet, RS232, IR, & USB HID
  • Video wall support up to 8x5
  • Multi-view support with over 40 layout presets
  • HDCP 1.4/2.2 Compliant
  • Fully interoperable with other products using SDVoE technology
  • Easy to configure using Liberty AV's NEW Arranger software

IPEX6000TC-C Summary

The IPEX6000TC-C is an AVoIP PoE powered A/V transceiver integrated with both encoder and decoder configuration which can transmit and receive video signals simultaneously. The DigitalinxIP IPEX6000TC-C supports IP‐based switching and extension of true 4K/60Hz (4:4:4) video with zero frame latency up to 100 meters when using CAT6A F/UTP cabling. The transceiver supports independent routing of all AV, USB HID, IR, Ethernet and RS232 signals. All transceivers on an AV network can simultaneously transmit and receive full 4K 60 4:4:4 signals. The IPEX6000TC-C is HDMI 2.0 and HDCP 2.2 compliant and supports all video resolutions that fit into the HDMI 2.0 timing envelope of 594 MHz, such as 4K@60Hz 4:4:4 24bpp and 4K@60Hz 4:2:0 30bpp HDR, including DolbyVision, HDR10 and HLG. The transceiver features lite compression technology which is activated automatically when the raw data rate exceeds the Ethernet bandwidth so that all supported timing formats can be delivered through a single 10G Ethernet cable.

The IPEX6000TC-C can be used in a point to point installation or in a matrix configuration that supports routing of one to one and one to many including multi-view for single display outputs and video wall configurations up to an 8x5 (Rows x Columns).

When multiple IPEX6000TC-C transceivers are deployed on an AV network, for basic system access and operation, a license code from Liberty’s Arranger offering is required.

Port speed requirements for each transceiver is ~6‐8Gbps for 4K signals and 3.2Gbps for 1080P signals, therefore the IPEX6000TC-C requires a 10GbE PoE managed network switch for optimal performance.

IPEX6000TC-C Diagrams

No available cross references for IPEX6000TC-C

Alternatives for IPEX6000TC-C

No equivalent alternates available for IPEX6000TC-C

.

IPEX6000TC-C Firmware

IPEX6000TC-C Software

IPEX6000TC-C Pre-made Drivers

Creston Home

Disclaimer: Liberty AV assumes no responsibility or liability for pre-built control system drivers. The driver may or may not work for all projects, in situations where the driver is not suitable for the switching architecture, the driver cannot be adjusted for customized usage by Liberty. If you would like to contract services for customized control for a project please contact your sales representative.

Required Products

Other Essential Products